Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

The 6-degrees-of-freedom (6-DOF) motion platform system utilizes six types of motion—heave, roll, pitch, surge, sway, and yaw—to replicate real-world environmental movements and verify the operational durability and reliability of test products. Possesses Korea’s only proprietary 8-axis expansion technology (6-DOF + 2 additional axes), developed in-house. Duratek designs and manufactures fully domestic electric motion platforms, with integrated capabilities covering software control, user interface (UI), and sensor fusion technologies.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

ELECTROMECHANICAL RELAYS

The MIL-DTL-5015 series of connectors were developed as military standard connectors and applied to various military equipment, it is also used in general industries, medical care, electric vehicles, robots and automation facilities based on its high durability and reliability. This series is threaded coupling and the connection between the contact and the wire is based on soldering. It can be used compatibly with third-party products of the same standard since it is produced according to military standards.

AI-based Intelligence, Surveillance and Reconnaissance Equipment

Operate the automated artillery system according to the operating procedure. It is the highest level controller of the automated artillery system that collects status information from each unit device controller that composes the automated artillery system, diagnoses faults and builds a database. - VxWorks operating system - Operating system recovery function - Building a failure history database in the built-in SSD - Check unit control device status information through communication

Utilizing optics, sensors, and precision measurement technologies, Sodern offers competitive solutions in a variety of fields, including space exploration, military, and neutron analysis. Sodern has achieved consistent growth and success in the space, defense, and neutron analysis markets, and is recognized internationally as a trusted partner. - 1/3 of global satellites are equipped with Sodern - World's Largest Star Tracker Portfolio +150 satellites carry Sodern's star trackers +550 star trackers already ordered +10 million hours of operation with 100% mission success - Two production facilities dedicated to high-end and low-cost star trackers