Harness Quantum Power for Exceptional Performance! IQM's most advanced superconducting quantum computing platform. It is immediately available with 20 high-fidelity qubits, easily upgradable to 54, and soon up to 150 qubits.

KT-1 Basic Trainer and KA-1 Armed Airborne Controller developed with indigenous technology are being operated in ROKAF and proving safety performance and reliability. KT-1 opened the age of aircraft exports starting from Indonesia and expanding its footprint to Turkey, Peru and Senegal with its high spin recovering capability, fuel efficiency and economic operation ability in the same class aircraft.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

With an operating voltage of 9~15 volts, the rugged SG15BL is designed with a high-performance brushless motor, magnetic encoder, and durable, hardened steel gears. It includes CAN 2.0 A/B or DroneCAN (formerly UAVCAN) control options with 360 degrees and multi-turn proportional rotation. With smooth and decisive movement and accuracy along with a true waterproof rating, this aluminum case 15mm micro servo is designed for industrial applications requiring maximum performance in tight spaces. #UAV #UAS #UGV #UUV #USV

The system can be used as a measurement device for first responders for the exploration of hazardous areas. GAMON-Drone system is designed to offer the best combination of portability, low power consumption and performance. The unit is assembled in a lightweight enclosure that contains both the Scintillator Detector and the Digital Signal Processing Electronics. GAMON-Drone can identify gamma-emitting radionuclides and differentiate them based on the category they belong to, distinguishing between NORM, medical and industrial.

The iGRVT-50 is InterGravity Technologies’ next-generation green-propellant orbital transfer vehicle (OTV), purpose-built for the rideshare launch ecosystem. iGRVT-50 enables small payloads (up to 15–20 kg class) to be deployed or serviced in a wide range of orbits. Key Features - Payload Capacity : Up to ~20 kg class hosted payloads - Propulsion System : 20 N green bipropellant thrusters (C₂H₆/N₂O) - Delta-V Capability : > 450 m/s - Communications : UHF, S-band TM/TC, X-band downlink

TESCAN SOLARIS is a fully automated sample prep platform optimized for advanced devices with sub-10 nm features. It integrates the Triglav™ SEM, AutoTEM Pro™ software, and OptiLift™ nanomanipulator to enable hands-free, repeatable lamella prep in planar, inverted, or top-down geometries.

1. Machining • Small, medium, and long bed machining available, with sizes up to 20 meters • Precision 5-axis machinery supporting 4m, 6m, 8m, and 20m machining beds. • Capable of machining both hard and soft metals 2. Sheet Metal Fabrication • Roll forming (11m), skin stretch forming (10m) • Bladder and stretch wrap forming • Skin milling & NC routing 3. Composite • Specialized Curing Oven up to 15M • Layup Facility 4. In-house Heat Treatment Facility (NADCAP Accredited) Highlights √ Proven Korea Defense Offset Partner for Global OEM √ Integrated Global Program Operation in Korea and USA Facilities √ Boeing & Lockheed Martin Award Winning Supplier Project Highlight : • A32X/A330 Skin Structure, Floorgrid, Doors • KT-100 Full aircraft Integration • Helicopter Fuselage, Torque Box, Bulkhead, Leading Edge etc.