Ray Service, headquartered in Staré Město, Czech Republic, is an international innovative manufacturer of cable harnesses, electromechanical assemblies, and electronic equipment. It is also a distributor and integrator of cable components and system products. More than 30 years of experience and intensive development have resulted in a strong, modern enterprise, a reliable and sought-after partner on an international level.

The SBC6511 Rugged Single Board Computer(SBC) from Abaco Systems features the new high performance, highly integrated Intel® Xeon® E processor (‘Coffee Lake Refresh’). Powered by Intel® Xeon® W processors, offering robust computational power. • Supports up to 64 GB DDR4 SDRAM with ECC and up to 256 GB (or in some variants up to 480 GB) NVMe SSD storage • Offers high-throughput networking: Dual 40 GbE data-plane (KR4 “fat pipes”) • Features the Xilinx® Zynq® UltraScale+™ MPSoC FPGA (ZU7EG) for enhanced security

Wheels that can drive the tank

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

It is a system that performs missions such as monitoring, surveillance and reconnaissance by ejecting and launching a foldable fixed-wing drone from the canister(tube) launcher. It is equipped with EO/IR Cameras (Electro-Optical / Infra-Red), which are mission equipment for reconnaissance, so that effective day and night image information can be collected. The gathered image information is transmitted to the ground control system (GCS) in real time while detecting and tracking the target by applying AI-based image processing technology. The foldable fixed-wing UAV has a simple structure and light weight, so it can be stored and transported in the canister launcher, and can be operated immediately so that it can be operated without time delay, and if necessary, the air vehicle can be retrieved and re-used by using a net-type recovery system.

Taesang manufactures Fixed Wing Aircraft using advanced closed die forging technology with SMS Group equipment. This process ensures precision, consistency, and superior quality for critical aerospace applications

Lock Ring & Braid & Backshell

In addition to honeycomb potting, sandwich components often also have to be sealed and thus reinforced in the edge areas. For this purpose, similar or even identical filling materials are used as those used for filling the honeycombs themselves. Namely, core and edge filling compounds with very low density, which is achieved by enriching the material with hollow spheres. With our dosing technology, this process can also be automated. The 1-component or 2-component materials are processed gently – without changing their material properties. The material application can be fully automated or semi-automated. Thanks to pulsation-free dispensing, the best results can be achieved with the minimum of effort. This allows you to reduce production times while optimizing production processes at the same time.