The AB-M1300 is a 1.3 ton-class eVTOL AAM. With a wingspan of 10 meters, the AB- M1300 is a crewed–uncrewed hybrid aircraft aiming for commercialization in 2028. Falling under the Light Sport Aircraft (LSA) certification category, it can carry up to two occupants, reach a maximum speed of 400 km/h, operate for two hour of flight time, has a maximum take-off weight (MTOW) of 1.3 tons, and a payload capacity of 250 kg. The AB-M1300 is designed for a variety of missions, including mid-mile logistics, personal leisure use, and pilot training.

CI Systems사의 는 I-레벨 광학 테스트 및 실험실 테스트를 수행하는 데 이상적인 장비입니다. 소형이기 때문에 휴대 가능하며, 컴퓨터화되어있어 차량에 설치할 수 있습니다. 열화상 장비 및 가시광 센서에 대한 종합적인 테스트를 현장에서 할 수 있어 D-레벨 시설 없이도 테스트를 효율적으로 수행할 수 있습니다. 콜리메이터, 방사선원(블랙바디, 가시광 광원), 타깃 휠(수동 또는 전동)로 구성되며, CI Systems의 CTE 소프트웨어와 연동 시 간편하고 객관적이며 반복성을 극대화한 테스트가 가능합니다. 환경 변화에도 높은 정확도를 유지하며, 환경 챔버 테스트, 생산 라인 테스트, 현장 테스트 등 다양한 환경에서 활용할 수 있습니다. The CI Systems ILET (Intermediate-Level Electro-Optical Tester) family of test systems is ideally suited for performing I-level optical tests and laboratory testing. Portable, compact and computerized, ILET testers can be installed on a vehicle, bringing comprehensive testing of thermal imagers and visible light sensors to the field, reducing the need of D-Level facilities. The basic ILET configuration includes a collimator, a radiation source (blackbody and/or visible light source) and a target wheel (manual or motorized). The ILET is easy to use when interfaced with CI Systems’ CTE software (optional), minimizing testing turnaround time and maximizing testing objectivity and repeatability. The testers retain their accuracy over a wide range of ambient temperatures. Thanks to the ILET’s outstanding features and versatility, it is useful in a variety of applications such as testing in environmental chambers, testing on production lines and testing in the field..

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

It is a hybrid-powered(Engine + Generator) multicopter system that significantly overcomes the limitations of short flight times typically associated with battery-powered drones. It can carry up to 10 kg of mission equipment and perform operations for up to 2 hours, with the capability to autonomously land on moving vehicles and naval vessels. Its versatility is further enhanced through the development of various mission equipment, making it suitable for multipurpose applications.

Functional Military Boonie Hat Optimized for Mission Execution The MIF Tactical Boonie Hat is a functional hat designed to ensure efficient mission performance in tactical operational environments. With both breathability and durability, it maintains wearer comfort even in harsh outdoor conditions and supports stable activity during operations.

Kia developed Granbird Bare Chassis Vehicle based on long-accumulated technology and infrastructure for commercial vehicles. This Granbird Bare Chassis vehicle can be easily modified as specialized vehicles on the basis of diverse customer requirements.

Monitors abnormal engine operation based on digital and analog signals from the aircraft engine. It calculates engine life indices and detects engine malfunctions for generate a Pilot Fault List (PFL), which will stored in memory. When an engine failure is detected, it provides warning for display on the Central Maintenance Panel (CMP). Developed as a replacement for obsolete, achieving 60% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x16 Discrete Inout - x14 Discrete Output - x3 Analog Input - x1 RS-232 - Size: 283 x 265 x 89 (mm) - Weight : 4.1Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 25W)

Features - Excellent absorption performance (Max: -25 dB, Avg: -10 dB) - Withstands 00 minutes at 000 °C - Easily applicable to complex structures, including curved surfaces, gaps, and protrusions - Low dry density and specific gravity - Reduced number of coating layers (improving workability) - Passed environmental resistance and durability tests according to the operating conditions of guided missiles. - Insulating properties to minimize the effects of lightning