The IMX-5™ includes Attitude Heading Reference System (AHRS) sensor fusion to estimate roll, pitch, and heading. Adding GNSS input to the IMX-5 enables onboard Inertial Navigation System (INS) sensor fusion for roll, pitch, heading, velocity, and position. Features Tactical Grade IMU Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Surface Mount Reflowable (PCB Module) Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

- 1 axis Fiber Optic Gyroscopes - Bias Repeatability: 0.1°/hr - Bias Stability: 0.02 °/h (1,000 sec) - Angle Random Walk: 0.005 °/√hr - Scale Factor Accuracy: 500 ppm - Operating Voltage: 5 V (1 A) - Interface: RS422 Weight: 1.0 kg EMC: MIL-STD-461E

ORSKOREA’s cylindrical grinding machines are engineered to deliver superior surface quality and tight tolerances for high-value parts. They are widely used in aerospace, defense, automotive, medical, and electronics industries for components that demand both strength and precision—such as engine shafts, landing gear parts, gears, and bearings. Key Advantages • Handles diverse, small-batch productions with consistent repeatability • Exceptional dimensional precision for tight-tolerance parts • Supports tapered and curved surface grinding • Flexible workpiece capacity with swing up to 350 mm • Smooth table movement with low noise and vibration for stable operation By combining precision, versatility, and long-term reliability, ORSKOREA’s cylindrical grinders provide manufacturers with the performance needed to meet mission-critical requirements.

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

- Reduced weight and manufacturing cost by more than 30% compared to conventional metallic propellant tanks - Designed and qualified to according KARI requirements - Proof & burst pressure application - Cyclic pressure(MEOP, Max. Enveloped Operating Pressure) application, more than 40 cycles

We provide advanced Laser-wire Directed Energy Deposition (LW-DED) 3D printing service. Our capabilities include processing various aerospace-grade materials including titanium, niobium, and other specialized alloys, with unlimited scalability for critical aerospace component production and prototyping.

- Swarm (Multicopter) : 20 Drones/ 1 swarm - Endurance : Rceonnaissance Drone: 23mim. / Loitering munition: 23mim. - MTOW : 2.4kg - Payload : 600g (Leader: EO/IR/LRF, Attack Drones : munition ) - Size : 300x360mm - Control Range : up to 5km

The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.