- The 2nd generation mightyZAP series supporting dynamic speed & current control as well as position control along with position & current feedback - Built-in drive circuit, position sensor, 12mm diameter coreless DC motor and gear box - 27/40/53/90mm stroke option - Rated Load of 12N ~ 100N according to gear ratio for each stroke (Speed is inversely proportional to Rated Load, so the stronger the Rated Load, the slower the speed.) -Support RS-485 or TTL / PWM communication * TTL / PWM communication version operates by automatically recognizing the input TTL / PWM signal * When using PWM communication, only the position command is available without position feedback (For feedback feature, use TTL or RS-485 communication) Both MODBUS RTU and IR open protocols available (Default : IR Open protocol)

We can process various materials using machining facilities such as 3-axis, 5-axis, and profile grinders. (Aluminum, copper, stainless steel, Super Alloy, etc.)

The A-C series is the most lightweight and low profile altitude switch in the Precision Sensors product line. The capsule based sensing element provides repeatable and precise absolute pressure threshold detection by sensing changes in the ambient air pressure compared to an evacuated capsule. The skeletal construction removes the need for bulky pressure fittings.

Typical uses include aircraft cabin air pressure monitoring.

For an environmentally sealed alternative, refer to the E-C series. For qualification information, please consult the sales or engineering departments.

Features

Intended for gaseous media
Low profile skeletal design
Ni-Span-C capsule provides superior setpoint stability over temperature
Custom configurations available upon request

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

Teledyne FLIR's Tau 2 series offers 40 variants of the most reliable and rugged longwave infrared (LWIR) thermal camera module. Equipped with a simple optica...

Rolatube Tripods are purpose-built for applications where mobility, speed, and performance matter. Constructed from Rolatube’s patented rollable composite material, each tripod offers a durable yet lightweight structure that rolls or folds down for easy transport and storage. Designed to support a range of payloads and mission profiles, the lineup includes the highly portable System 30, versatile Industrial Compact Tripod, and robust System 50 Tripod MIL for demanding field operations. These tripods are engineered for rapid deployment and compatible with Rolatube masts or other payloads requiring stable elevation. Their corrosion-resistant build, compact footprint, and tool-free setup make them ideal for communication, surveillance, and sensor support across defence, emergency response, and industrial sectors.

QPL certification is a system in which the US government guarantees the quality only for products that have passed strict local company inspections made of 150 tests and verifications under the supervision of the US government. Yeonhab Precision obtained the certification in Asia for the first time after 10 years of application. In particular, with the successful QPL registration for the first time in Asia, Yeonhab Precision is the first and only company in Asia which got the qualification of marking “MS” with the title of “Korea’s first MIL-DTL connector”. We will provide customers with the best products as we have the sense of the pride of developing the QPL certified connector with our own technology in Korea.

The lightest plate carrier 4-way stretch Tweave sewn internally for comfort Poly mesh cummerbund for increased ventilation Rear internal pocket for storage Elastic webbing straps for cable management PALS webbing for MOLLE attachment Removable front flap Zipper for DS Assaulter's Zip-On Back Panels QASM buckle System Available in different shapes depends on the plate thickness Soft armor can be added Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)