This is a contact-type and non-contact optical cable assembly for high-speed transmission of large-capacity signals such as video signals. It is a cable assembly for optical signal transmission in compliance with MIL standards by utilizing a contact/non-contact connector developed by Yeonhab Precision.

The VPX power supplies are compliant with VITA 62, MIL-STD-704, MIL-STD-461 and MIL-STD-810 for 28 Vin DC, 270 Vin DC & Universal AC systems. The VPX delivers up to 1000 W and up to 6 outputs with a typical efficiency of 91%. Offered in VITA approved ruggedized 3U and 6U size packages with internal conduction cooling and high speed backplane connectors.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. Linear Acceleration Compensation Certus Mini uses an innovative algorithm to compensate for linear accelerations. This allows Certus Mini to maintain accurate roll and pitch through short term linear accelerations that typically cause significant errors in competitors systems. For long term linear accelerations Certus Mini supports the addition of an external GNSS receiver for full acceleration compensation. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

Cooled thermal imaging camera module F/#4.0 • Detector type: Cooled InSb 15μm (640 x 512) • NETD: <20mk typical (without lens) • Continuous ZOOM LENS • Continuous Digital Zoom • Advanced image processing - Auto Gain Control (AGC) ) - Adaptive Histogram Equalization (Adaptive HEQ) - Local Area Enhancement (LAE) - Digital Detail Enhancement (DDE) - Denoise Reduction (DNR) - Sharpness • MTTF (Mean Time To Failure) 15,000 hours • Various color sets (WhiteHot / Rainbow / Twilight / TwilightShifted / Turbo / Iron / Plasma)

A converter-integrated Main Generator installed in the T-50 series that supplies power to the system.

Developed and manufactured by MPS Microsystems based on customer specifications, this lens actuator forms an essential component of a laser guidance system for unmanned flying objects. It enables 2 lens groups to be displaced individually over a total range of 48 mm and makes it possible to focus a laser over a distance of several kilometres. The main technical difficulty inherent to this actuator lies in meeting very stringent requirements for alignment between the two lens groups (< 10 µm) and in maintaining a very small tilt of the lenses over their entire stroke (lateral deviation < 2 µm). The key part making it possible to ensure such specifications is a frame machined by milling from an aluminium block, into which the 2 drive systems are fastened. These systems each consist of a Ø16 mm brushless motor and a Ø4 mm ball screw with an axial play of less than 5 µm. Backlash-free and frictionless sliding of the lens holders is ensured by standard L306 linear ball bearings manufactured by MPS Microsystems.

JWB Connector/VG95234 has the same structure as the threaded coupling JW5015A connector/MIL-DTL-5015, and is developed with the bayonnet method, which guarantees the stability of the coupling while being simple to combine and separate. It is used for military vehicles and ships such as tanks and armored vehicles because of its excellent moisture barrier and is resistant to vibration and shock. Based on these characteristics, it is widely supplied and applied to general industries.

Based on our state-of-the-art facilities, the semi-conductor machinery component sector manufatctures parts including Chamber assembly, and Main Frame Assembly.