In addition to stocking common grades, shapes and sizes, PASU has a full inventory of nonstandard sizes. Progressive’s multiple value-added processing capabilities provide the ability to supply near-net products resulting in reduced machining time. From 2 stocking locations (Hartsville, South Carolina & Las Vegas, Nevada) the company efficiently supports the North American market, with close proximity to international airports and major shipping ports on the east & west coast of the USA providing exceptional service to the global market. Progressive’s AS9100D Certified quality system is complemented with many major OEM Approvals including Pratt & Whitney - LCS. Specialty products include round bar, flat bar, plate & forgings in the following alloys: 17-4PH & 15-5PH 13-8MO 13-8 Supertough® 4340M (300M), 4330M, 4340 VAR Cronidur 30® Custom 455® & Custom 465® 440c & 440c VAR Value added processing capabilities include: Production cutting up to 22" diameter Plate processing up to 24" x 72" x 170" Waterjet cutting & near-net shape processing Grinding, trepanning & gun drilling Heat treating, destructive & non-destructive testing

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

RF Systems designs and manufactures antennas for UAVs, guided missile seekers, and satellite systems. Through proprietary Dip Brazing process, we achieve high structural precision and RF reliability in every antenna. 1. Guided Missile Seeker Antenna 2. UAV Slot Array Antenna 3. Satellite Communication Antenna 4. Satellite Lightweight SAR Antenna 5. Satellite SAR Feed

Yuan Thor platform serves as the computational core for autonomous systems. Powered by NVIDIA® Jetson Thor™ (128GB LPDDR5X, 2560 CUDA cores, 96 Tensor cores), it delivers up to 2070 FP4 TFLOPS of AI performance for real-time sensor fusion, data analytics, and edge decision-making. Thor supports 16× MIPI CSI-2 cameras, audio in/out, CAN Bus, UART, I²C, SPI, and GPIO, enabling precise, low-latency responses for robotics, industrial automation, and autonomous vehicles.

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

Mil-COTS Isolated DC-DC converters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. These “off-the-shelf” converters are compatible with the industry standard format, operate at a fixed frequency, and follow conservative component derating guidelines. MilQor products are designed and manufactured to comply with a wide range of military standards.

AquaShieldIR key benefits: Water repellency: creates a water-repellent surface on IR imaging lenses, preventing water droplets from adhering. This feature ensures clarity and visibility, even in rainy or foggy conditions. Enhanced visibility in wet conditions: by repelling water droplets, AquaShieldIR™ enables IR imaging lenses to perform optimally in wet conditions. Improved Image Quality: thanks to the preventions of water droplets and contaminants from adhering to the lens surface, resulting in improved image quality.