Engine Parts, Overhaul

Type : Axial (3P) Size(Ø, mm) : 310 × 109 Weight(kg) : 37 N. Speed(rpm) : 2100 N. Torque(Nm) : 450 N. Power(kW) : 100

TMM-238 is developed and designed for use in operator display for Militray systems. It has 1920 x 1080 pixels visible resolution, which is designed and tailored for use in operator display for Militray systems • 23.8”Inch display, 16:9 / 1920 x 1080 Resolution • HDMI, DP, RGB, input • Full Range Digital Dimming Control • 6 Key Membrane Switch • Power range : DC 24V Input • LCD PANEL backlight unit : LCD Backlight units

Based on the T-50 trainer’s superior performance and an armament storing capability, the FA-50 aircraft is further developed and upgraded with Tactical Data Link, Precision Guided Munitions, and Self Protection subsystem. Featuring a fighter jet-class flight performance, the FA-50 aircraft has been deployed and operated in the Republic of Korea Air Force (ROKAF) since 2013.

Introducing the FoldIR 30-450mm f/3.4 continuous zoom lens with Ophir's innovative folded optical design, offering lightweight, compact design while maintaining long optical lengths and improved tolerance sensitivity. This design ensures exceptional performance even in challenging environments, addressing stabilization and athermalization issues. Its unique f/3.4 aperture guarantees superior image quality, surpassing larger aperture zoom lenses in diffraction limit MTF and IR signal collection. The lens features a built-in mechanical shutter for NUC control, enhancing image quality through Ophir's control system. Weighting under 2kg, offering an impressive detection range of over 20km, and a horizontal field-of-view of 26.9º (WFOV) and 1.7º (NFOV). This compact, lightweight, long-range, high-performance lens is the ultimate selection of for optical air-land-sea optical gimbals and payloads. Key features include: • Efficient folded optics design for min. volume use • Physical shutter for NUC • Designed for MWIR 10μm SXGA sensors • For air-sea-land gimbals and payloads • Weight <2kg • Detection range >20km • HFOV 26.9º WFOV/ 1.7º NFOV

Founded in 1849, Ducommun is the oldest company in California, USA. Currently located in Carson, near Los Angeles, the company began as a hardware supply store in Los Angeles during the California Gold Rush and now designs and manufactures aerospace, RF coaxial switches, switch matrices, and millimeter-wave components. - Microwave Products (available from DC to 46GHz SPST through the SP10T range) - Switch Matrices (product design and customization to meet individual customer requirements) - Ducommun RF products cover the DC range up to 110GHz - Coaxial Switches available up to 40GHz - Low Noise / High Power RF Products - Space-Grade Products

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

The MAGIC1A is a rugged 3U VPX SWaP-C3 high-performance embedded computer combining an Intel Xeon E3-1505M v6 CPU and NVIDIA Quadro P2000 GPU, offering strong compute performance, broad I/O, rugged resilience, and flexible software support. • Xeon E3-1505M v6 quad-core CPU + Quadro P2000 GPU → ~2.3 TFLOPS • Ethernet, USB, serial, MIL-STD-1553, ARINC 429, DisplayPort/DVI, GPIO; up to 8 TB removable SSD with fast-purge • MIL-STD rated, baseplate or fan cooling; −40 °C to +65 °C range • Supports Linux/Windows/VxWorks & CUDA/OpenCL/DirectX/OpenGL; includes AXIS software toolkit