The SCFAN-CTRL-10U is an internal fan control module installed inside the chassis to provide advanced cooling control and system thermal management. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM), supporting up to two 12V @ 3.5A fans and seven 12V @ 2.5A fans. This module ensures stable cooling performance and system reliability for high-density VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, where it provides precise and efficient cooling control for mission-critical radar operations.

Yuan Thor platform serves as the computational core for autonomous systems. Powered by NVIDIA® Jetson Thor™ (128GB LPDDR5X, 2560 CUDA cores, 96 Tensor cores), it delivers up to 2070 FP4 TFLOPS of AI performance for real-time sensor fusion, data analytics, and edge decision-making. Thor supports 16× MIPI CSI-2 cameras, audio in/out, CAN Bus, UART, I²C, SPI, and GPIO, enabling precise, low-latency responses for robotics, industrial automation, and autonomous vehicles.

Aviation piston, cylinder, airplane bolts and nuts Tank engine block , Tank nozzle and cover, single wiper driving unit, Balkan parts, composite wrench, 60mm mortar, 4.2inch mortar, 90mm recoiless rifle, 2.75"rocket warhead, 81mm mortar, target for shooting range

· Next-generation naval combat platform with full-spectrum mission readiness: from naval warfare domains to asymmetric threats · Integrated manned-unmanned combat system enabled by UAVs, USVs, and UUVs · Multi-layered defense system with laser weapons and long-range loitering munitions · Optimized manning for modern warfare through an integration of smart bridge and combat Information Center, automation and unmanned systems

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

SJP’s special parts are custom-designed and manufactured to meet unique requirements that standard components cannot fulfill. With our advanced R&D capabilities and state-of-the-art CNC multi-tasking machines, we handle complex geometries, tight tolerances, and special materials with precision. These parts are widely used in medical devices, semiconductor equipment, precision instruments, and aerospace & defense, where reliability and high accuracy are essential. From rapid prototyping to full-scale production, we deliver end-to-end solutions that shorten development cycles and enhance product competitiveness.

Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner