- Inspection robot control and damage assessment for robot operators. - Pre-inspection information creation for inspection planning. - A 3D user interface for inspection robot status monitoring. - Damage assessment and result report generation capabilities.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

The radar that Raytheon Missiles & Defense is building for the U.S. Army has long been known as the Lower Tier Air and Missile Defense Sensor (LTAMDS). Now, ...

1. Filler Metal Name Material/Alloy AWS W-No. ISO-No. Nickel 61 Ni A5.14 ERNi-1 2.4155 SiNi2061 MONEL® 60 Ni-Cu A5.14 ERNiCu-7 2.4377 SNi4060 MONEL® 67 Cu-Ni A5.7 ERCuNi 2.8037 SCu7158 INCONEL® 72 Ni-Cr A5.14 ERNiCr-4 SNi6071 NC 80/20 Ni-Cr 2.4639 INCONEL® 82 Ni-Cr A5.14 ERNiCr-3 2.4806 SNi6082 INCONEL® 622 Ni-Cr-Mo A5.14 ERNiCrMo-10 SNi6022 INCONEL® 625 Ni-Cr-Mo A5.14 ERNiCrMo-3 2.4831 SNi6625 INCO-WELD® 686-CPT Ni-Cr-Mo A5.14 ERNiCrMo-14 SNi6686 INCO-WELD® 725NDUR Ni-Cr-Mo A5.14 ERNiCrMo-15 SNi7725 INCO-WELD® C-276 Ni-Cr-Mo A5.14 ERNiCrMo-4 2.4886 SNi6276 INCONEL® 52 Ni-Cr-Fe A5.14 ERNiCrFe-7 SNi6052 INCONEL® 52M Ni-Cr-Fe A5.14 ERNiCrFe-7A INCONEL® 92 Ni-Cr-Fe A5.14 ERNiCrFe-6 SNi7092 INCONEL® 617 Ni-Cr-Co-Mo A5.14 ERNiCrCoMo-1 2.4627 SNi6617 NILO® CF36 Ni-Fe INCOLOY® 65 Ni-Fe-Cr A5.14 ERNiFeCr-1 SNi8065 INCONEL® 718 Ni-Fe-Cr A5.14 ERNiFeCr-2 2.4667 SNi7718 Titanium Grade 1 Ti A5.16-90 ERTi-1 Titanium Grade 2 Ti A5.16-90 ERTi-2 Titanium Grade 5 Ti-Al-V A5.16-90 ERTi-5 Titanium Grade 7 Ti-Pd A5.16-90 ERTi-7 2. Electrodes Name Material/Alloy AWS W-No. ISO-No. Nickel 141 Ni A5.11 ENi-1 2.4156 ENi2061 MONEL® 190 Ni-Cu A5.11 ENiCu-7 2.4366 ENi4060 MONEL® 187 Cu-Ni A5.6 ECuNi 2.0838 ECu7158 INCO-WELD® A Ni-Cr-Fe A5.11 ENiCrFe-2 2.4805 ENi6092 INCONEL® 152 Ni-Cr-Fe A5.11 ENiCrFe-7 ENi6152 INCONEL® 182 Ni-Cr-Fe A5.11 ENiCrFe-3 2.4807 ENi6182 INCONEL® 112 Ni-Cr-Mo A5.11 ENiCrMo-3 2.4621 ENi6625 INCONEL® 122 Ni-Cr-Mo A5.11 ENiCrMo-10 ENi6022 INCO-WELD® C-276 Ni-Cr-Mo A5.11 ERNiCrMo-4 2.4887 ENi6276 INCO-WELD® 686CPT Ni-Cr-Mo A5.11 ERNiCrMo-14 ENi6686 INCONEL® 117 Ni-Cr-Co-Mo A5.11 ERNiCrCoMo-1 2.4628 ENi6617

Our PIT systems are built to withstand the toughest weather conditions and meet international aviation standards. Our versatile configurations are tailored to your operational needs - from compact access units to advanced pop-up mechanisms. PIT system types: MINIPIT Hatch Systems – Compact and simple underground solution for smaller aprons or light traffic zones. Standard Hatch PIT Systems – Durable and reliable access pits for electrical, fuel, and IT systems under the apron. Pop-Up PIT Systems – Mechanized lifting PIT system for convenient and fast surface access when needed. Each system offers specific advantages depending on the scale, type of aircraft, and regional standards of your operations.

KAI participates in the system integration of the KSLV-II and development of its first-stage propellant tank while trying to secure the technology of Space Launch Vehicle.

STX Engine produces medium speed engine driven power generation equipment that can satisfy customers 100% by ideally combining medium speed engines, which have been collectively produced at our Changwon factory since obtaining licenses from the mid 1970's from MAN ENERGY SOLUTIONS in Germany and NIIGATA POWER SYSTEM in Japan, with a power generation system designed with rich experience in the area of system engineering. By installing diesel engine power generation equipment in locations across Korea and overseas, such as on islands, remote areas, resorts, etc., where no public power supply is available, as well as industrial complexes and hospitals which require good source of power, and factories receiving expensive public power supply, etc., our customers can confirm the investment effect within a short period of time after experiencing the power supply we make available to them, as well as low installation and operation costs and maximized availability of the equipment.

Tescan AMBER integrates BrightBeam™ field-free SEM optics with the Orage™ Ga⁺ FIB and fully automated lamella workflows. Designed for versatility, it supports inverted and planar sample prep, nanoprototyping, and gentle final polishing across a wide range of material types.