AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

A cost-effective and reliable EO/IR solution designed for unmanned platforms, combining compact design with strong performance. The system integrates QVGA/VGA-class infrared sensors and 2–20 megapixel EO cameras, providing versatile options to meet different operational requirements. o Infrared (IR) Sensor: QVGA/VGA resolution, optimized for detection and recognition in short-to-mid range surveillance o Electro-Optical (EO) Module: 2MP–20MP visible light cameras with high-resolution imaging, adaptable to multiple mission profiles o Design Philosophy: Lightweight, compact, and robust for integration into unmanned aerial vehicles (UAVs), unmanned surface vehicles (USVs), and ground robotics o Key Value: Balances price competitiveness, system reliability, and modular scalability for mass deployment

The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

Haigh-Farr offers a family of low-cost Blade antennas covering frequencies from 300 MHz to 8 GHz. These antennas have been in use for over 30 years in airborne applications, and most models are available for off-the-shelf delivery. Haigh-Farr also offers a series of broadband blade antennas covering a variety of frequency ranges.

Armada is one of the worlds leading defence technology analysis magazines since 1976. The editorial includes technology analysis, information about ongoing procurement programmes worldwide, news analysis, comments and interviews from top defence officials. It has become the go to defence encyclopaedia for the defence community, especially those who make purchasing and procurement decisions.

Tactical Information Communication Network (TICN), a core system for network-centric warfare (NCW) It is a communication-based system that guarantees real-time command and control of reconnaissance, surveillance, command decision, and true strike in network-centric warfare (NCW), including network management system (TIPS)/switching system (TIPS), tactical mobile communications system (TMCS), and small-capacity transmission system. It is divided into five subsystems: (LCTRS), High Capacity Transmission System (HCTRS), and Multi-band Multi-Channel Multi-function Radio (TMMR).

The SCFAN-CTRL-5U is an internal fan control module installed inside the chassis to manage cooling performance. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM) to control up to one 12V @ 3.5A fan and seven 12V @ 2.5A fans. This module ensures efficient thermal management and stable system operation in high-performance VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, providing reliable and optimized cooling control for mission-critical environments.

Inserts are used in the aerospace industry in lightweight sandwich panels and are then bonded. The panels can then be screwed or various components can be fastened. However, the manual process has several disadvantages: Enormous expenditure of time for the manual filling of several thousand inserts, high material waste due to relaxation of the material, and high material costs through the use of cartridges. ViscoTec can map the filling process automatically. The dispensing process is absolutely precise. A significant amount of material can thus be saved. In addition, material can be supplied from large containers, which in turn lowers purchase prices. Another important advantage: As a rule, no new specifications have to be made since no changes are made to the actual process.