- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

< Frequency Range > ● 20 ~ 1000 MHz < Output Power (W) > ● 100 < Gain (db) > ● 50 < Power Supply (V) > ● 32 < Current (A) > ● 10 < Dimension > ● 177.1 x 95 x 30 (mm)

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

Active phased array fire control radar (AESA) for aircraft A fire control multi-function radar (MFR) that can simultaneously detect, identify, and track multiple targets, including in the air and on the ground, and has SAR and NCTR functions. Aircraft (fighter)-mounted AESA radar is a core sensor for fighter jets to perform day/night/all-weather multiple missions. It operates in multiple modes such as air-to-air/air-to-ground/air-to-sea/support mode, and acquires ground images and air/ground in electronic warfare situations. It is essential mission equipment for fighter jets that detects/tracks multiple targets and supports guided missile guidance and gun shooting.

We have taken the standard housing configuration of the P1 & P3 mounting dimensions while incorporating true differential pair contacts within the P1 & P3 dimensional constraints. P1 connector housing contains 21 position true differential pair blind mate contacts allowing board designers to carry high density differential pair signals from the LRU via motherboard to daughter-card plug in modules with a single connector P1 type housing.

The COX640AV embodies COX’s cutting-edge cooled MWIR imaging technology, delivering unparalleled performance for the most demanding applications. Its 640x512 resolution and 15μm pixel pitch InSb sensor achieve thermal sensitivity of less than 20mK, ensuring crystal-clear imaging for precise analysis. Capable of operating across a wide temperature range, the COX640AV supports multiple imaging modes and advanced processing functions including AGC, NUC, and customizable color palettes. This ensures adaptability to a variety of mission-critical environments such as defense, aerospace, scientific research, and industrial inspection. In addition to superior imaging quality, the COX640AV is designed for reliability and operational readiness. With rapid image stabilization after startup and robust construction, it performs consistently in harsh environments where stability is non-negotiable. Its combination of cooled MWIR precision, advanced processing features, and rugged design positions the COX640AV as a trusted solution for customers who require accuracy, speed, and durability. By integrating COX’s proprietary calibration expertise, it not only provides outstanding real-time imaging but also guarantees long-term reliability and service continuity.

- Interior/Exterior lighting control device - Input Power : 28 VDC - MIL-STD-461 - MIL-STD-704 - RTCA/DO-160 Section 25