Our MDB1200WP industrial actuator offers a contactless magnetic encoder, brushless motor and IP67-certified water & dust-proof protection, making it suitable for many demanding industrial applications. This 30mm powerhouse delivers over 1500 oz-inches of torque at 7.4V and features an aluminum alloy case to dissipate heat, two ball bearings and five hardened steel gears, and PWM control protocol. Program numerous parameters to optimize the installation and performance for your industrial applications. #UAV #UAS #UGV #UUV #USV

The MD70MH-DroneCAN is an 11.6mm, metal gear, 13-gram micro servo for higher voltage applications. Featuring a single output ball bearing, cored brush motor, and magnetic rotary encoder, the MD70MH-DroneCAN is often used in compact fixed wing UAV and drone applications where space and weight are mission critical concerns. The MD70MH utilizes DroneCAN (formerly UAVCAN) control at a voltage range from 4.8~7.4 volts. #UAV #UAS #UGV

The AMT-206-1 composite tail rotor blade is a direct replacement for Bell 206A and 206B series helicopter tail rotor blades. Now fitted with a new style of feathering bearings manufactured by KAMATICS. These bearings provide a longer life expectancy, with a patented lining that provides lighter pedal loads and a higher level of chemical resistance, compared to that of the standard fabric Teflon-lined bearings. The AMT-206-1 tail rotor blade has a non-symmetrical airfoil section and incorporates a swept tip. The T/R Blade is primarily fabricated from uni-directional Graphite (carbon fiber) and Aramid (Kevlar™) continuous fibers suspended in an epoxy matrix and is fitted with a nickel abrasion strip on the leading edge. The abrasion strip is bonded on using a urethane adhesive. The AMT-206-1 composite tail rotor blades have a 30% cost advantage, twice the lifespan, higher strength and thrust, and a substantial noise reduction, making them safer and ideal for helicopter operators flying in noise-sensitive areas like national parks and built-up areas.

Utilizing optics, sensors, and precision measurement technologies, Sodern offers competitive solutions in a variety of fields, including space exploration, military, and neutron analysis. Sodern has achieved consistent growth and success in the space, defense, and neutron analysis markets, and is recognized internationally as a trusted partner. - 1/3 of global satellites are equipped with Sodern - World's Largest Star Tracker Portfolio +150 satellites carry Sodern's star trackers +550 star trackers already ordered +10 million hours of operation with 100% mission success - Two production facilities dedicated to high-end and low-cost star trackers

Global Wideband Connectivity for Mission Success Honeywell’s JetWave MCX satellite communications system delivers the world’s most advanced high-speed SATCOM capabilities needed for the most demanding mission profiles. It enables global in-flight broadband data connectivity on nearly any Ka-band network – including Inmarsat’s Global Xpress (GX) network, Wideband Global SATCOM (WGS), and other commercial and military Ka-band networks – making it truly network-agnostic for the most extensive global coverage. Built on proven, high-speed JetWave technology, JetWave MCX utilizes a wider frequency band (29-31 GHz Tx and 19.2-21.2 GHz Rx), offering access to commercial and military Ka-bands globally. And the dual polarity configuration provides increased bandwidth in high-traffic areas while meeting high-data uplink requirements that military and government operators require. JetWave MCX is designed with “future-proofing” in mind, exceeding current connectivity requirements while enabling expanded customer connectivity needs in the future. For the unique requirements of military and government operators, JetWave MCX can enable a wide variety of mission-critical applications, such as en-route mission communications, real-time weather, in-flight video conferencing, large file transfer, in-flight mission planning and briefings, ISR video transmission, and secure communications. We offer specialized data packages for ISR missions, making use of the increased upload speed capabilities. Single-IP address network-switching capabilities enable seamless connectivity for users globally, while access to resilient modem waveforms offers additional security and jam-resistance in hostile environments. JetWave MCX’s high-bandwidth capabilities can transform the aircraft into an “airborne communications node” by receiving data simultaneously from multiple sources – such as UAVs or ground forces – then processing and amalgamating the data for airborne Command and Control or for transmission to ground control. No matter the mission profile, JetWave MCX offers the resiliency, bandwidth, and network-agnostic capabilities needed to enable mission success.

Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

Magnetic sensors (Hall effect) for air and land applications fly by wire