The Signaty V IR Helmet Strobe is a Korean-made Identification Friend or Foe (IFF) device that supports IR and four LED colors (red, green, blue, white), ensuring visibility up to 5 km. It features short-range communication (CDS) for automatic synchronization among multiple units, along with SOS, auto-sync, one-hand operation, and vibration feedback functions. Powered by a single AA battery, it operates for up to 130 hours. Built to MIL-STD-810G standards for drop, waterproof, and dustproof protection, it delivers proven durability. Certified with KC and backed by domestic service, it is reliable for military, police, and firefighting operations.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Designed and suitable for a wide range of missions. It is light and ruggedized and its multi-purpose capability provides freedom of action for the commander in all environments.

EO/IR Payload System EOTS (Electro-Optical Tracking System) is an electronic optical image tracking device that identifies danger and emergency situations on the battlefield, monitors and tracks tragets, and calculates their coordinates, and is an essential equipment for drones that can be used in both military and private sectors. M1 and M2 were developed to use a common mount that connects to the drone by keeping the size of the gimbal assembly the same at 4 inches. M1 can be recognized at a maximum of 0.2km for humans during the day and at night, and M2, which operates in adverse conditions at night, can be recognized at up to 1.0km for tanks in the form of IR continuous zoom.

This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

Auxiliary generator that can receive separate power without starting the tank

aviation fuel refueling cart : Mobile refueling cart that can easily refuel light aircraft and helicopters Sump recovery system : Collect the drained/sumped aviation fuel from the aviation fuel refueling system, easily sample and test it, and then decide whether to drain it or return it to the system. Aviation fuel refueling system : The aviation fuel refueling system is compactly constructed with a skid for easy use and installation.

The member companies of GIFAS employ 195,000 people in their aerospace activities in France. These figures do not include temporary workers or the total number of suppliers and subcontractors; this field is estimated to be responsible for 350,000 jobs in France. Our sector is constantly in demand.