Type : Axial (3P) Size(Ø, mm) : 310 × 109 Weight(kg) : 37 N. Speed(rpm) : 2100 N. Torque(Nm) : 450 N. Power(kW) : 100

The IntuVue RDR-7000 is fully automatic and does'nt require active pilot adjustments of tilt and/or gain for operation. Reducing workload, allows pilots to focus on flying the most comfortable and safest route through weather. Engineered to provide far superior reliability, accuracy and durability than legacy magnetron-based radar systems, the RDR-7000 offers customers the flexibility to remotely enable advanced software features to provide them the clearest view of weather conditions around the routes they’re accustomed to flying. Key Honeywell Advantages: Next generation -fully automated, higher resolution weather radar system with airborne ground/sea mapping system Reliable and efficient - solid-state transmitters utilizing pulse compression provide reduced weight and power consumption, advanced coherent processing, and increased reliability Compact and easy to install - RDR-7000 IntuVue radar systems technology integrated into a small, lightweight package Available software upgrades - advanced features can be added at any time, including turbulence detection, advanced mapping, target detection and additional hazard features (lightning and hail detection), and forward looking (predictive) windshear Honeywell's RDR 7000 Radar helps in operational costs savings by reducing the delays & downtime caused due to hailstorm, weather incidents and windshears while optimizing routes to reduce diversions and turnbacks.

In collaboration with Hanwha Systems, we developed and optimized a Transformer-based AI model for ship and aircraft detection on embedded platforms. Targeting NVIDIA Jetson Orin AGX, the project utilized the MSAR (640×640) dataset along with large-scale training databases built from public sources. The RT-DETR model, currently under review, was optimized through hardware-friendly design, Int8 quantization, and specialized inference acceleration. As a result, the solution achieved up to 5x faster inference speed while maintaining accuracy, reaching 20% of NVIDIA TensorRT performance. This demonstrates the ability to deliver reliable, real-time detection capabilities in resource-constrained embedded environments, enabling next-generation defense and surveillance applications.

- Interior light that illuminates the entire cockpit - Adjust the DIM/BRT brightness by operating the knob switch - NVIS WHITE per MIL-STD-3009

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

NICKEL 200 / 201 -Bars-Sheets and Plates-Tubes and Pipes NICKEL 270 -Sheets and Plates-Wire MONEL® ALLOY 400 -Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 -Bars NILO® Alloy 36 -Bars-Sheets and Plates-Tubes and Pipes NILO® Alloy 42 -Bars-Sheets and Plates NILO® Alloy 48 -Bars-Strip NILO® Alloy K -Bars-Sheets and Plates-Wire INCONEL® Alloy 230 -Bars-Sheets and Plates INCONEL® Alloy 600 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 617 -Bars-Sheets and Plates INCONEL® Alloy 625 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® -Sheets and Plates INCONEL® Alloy 693 -Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 -Bars-Sheets and Plates INCONEL® Alloy X-750 -Bars-Sheets and Plates INCONEL® Alloy C-276 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy HX -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS -Bars-Sheets and Plates INCOLOY® Alloy 330 -Sheets and Plates INCOLOY® Alloy A-286 -Bars-Sheets and Plates NIMONIC® Alloy 75 -Bars-Sheets and Plates NIMONIC® Alloy 80A -Bars-Sheets and Plates NIMONIC® Alloy 90 -Bars-Sheets and Plates-Wire-Strip NIMONIC® Alloy 263 -Sheets and Plates UDIMET® Alloy 188 -Bars-Sheets and Plates UDIMET® Alloy L-605 -Bars-Sheets and Plates Waspaloy® -Sheets and Plates

The EMC-102 EDECU is configured as a common supervisory engine control for both T700-GE-701C/D and T700- GE-401C applications. Slated for use by the Army on current fielded models of Black Hawk helicopters, the control is configured with modern electronics, allowing for a more reliable alternative to the present Black Hawk control. The control unit is also compatible with the AH-64 Apache. The control is qualified to the latest Army requirements for superior operability in adverse environments.

With an AS9120-certified logistics system and strong semiconductor expertise, we are tailored to support defense and aerospace customers, where small-volume, high-mix requirements, long life cycles, and unpredictable demand are common. Beyond semiconductor components, we also provide electronic instruments and software solutions, serving as a total solution provider.