To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Designed to deliver the highest level of performance, the non-ITAR TAC-450-360 IMU includes our exclusive photonic integrated chip (PIC) technology. The high-performance TAC-450-360 IMU is designed for applications in which high bandwidth, low latency, and low drift are critical. The TAC-450-360 IMU is integrated with inertial-grade accelerometers and three axes of magnetometers to provide the high accuracy levels that leading autonomous and manned platforms demand. Highlights Designed for ease of integration with flexible interface settings and programmable message outputs Excellent performance in critical applications and the specs that matter most Improved SWaP plus robust performance and survivability Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology* reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-360 IMU provides the safe, accurate performance autonomous platforms demand.

The AB-U10 is a 10 kg-class vectored-thrust eVTOL. With a wingspan of 1.8 meters, it features a maximum take-off weight (MTOW) of 10 kg, a range of over 10 km, a payload capacity of 2 kg, and a maximum speed of 160 km/h. The AB-U10 is a lightweight mission aircraft specifically designed for anti-drone operations, equipped with an integrated net gun system.

The most modern and capable airborne surveillance solution available in the market today, GlobalEye is a true multi-domain Airborne Early Warning & Control (AEW&C) solution. With its mix of modern active and passive sensors, it provides long-range, early detection and identification of objects in air, at sea and over land from a single platform and also can provide real-time information to units in the Air Force, Army and Navy. This enables situational awareness of the surrounding areas and early detection of threats.

Patria CANDL provides a single data link solution for communications requiring high reliability, such as UAS payload data and C2. It enables air-to-air and air-to-ground Ad Hoc Networking as well as relaying for BLOS capability, thus enabling capabilities such as MUMT - Manned UnManned Teaming and LVC – Live Virtual Constructive training. 8 Mbps data rate with additional safety features for C2, dynamic Ad Hoc Networking communication, motion video and digital voice capability are all integrated in one Software Defined Radio based compact airworthy terminal. Our CANDL covers NATO IV C-band as well as WRC 2012 defined civil UAS C2 frequency band in single housing enabling both military and civil UAS applications. Networking and range performance can be further extended with optional external HPA (High Power Amplifier) module. C2 & Payload Data Secure Command & Control for UAV platforms, payload and missiles Payload data (HD video, IR, SAR) for manned/unmanned platforms Distribution of situational awareness through networked data transfer for fighters Operation in GPS-denied environment Platform independent system (air, naval, ground) Legacy systems upgrade for enhanced performance Manned-Unmanned Teaming (MUMT) Force multiplier in hostile environment Multi-platfrom and swarming capability Mission distributed decision-making and co-ordination Optimisation of the role and performance of the platform on-the-fly Real-time communication through ad-hoc IP-network Live Virtual Constructive (LVC) Training Cost effectiveness utilising simulators and synthetic forces More demanding and easily scalable training scenarios Hiding warfighting tactics into secure digital environment Enabling complex training scenarios for manned and unmanned platforms Joint-networked, real-time communication between all Live, Virtual and Simulated assets

We are recognized domestically and internationally for our technology and quality by supplying products manufactured based on our accumulated know-how and excellent technology to power generation equipment companies at home and abroad.

A reliable, quality full or semi-auto version of the rifle that has written entire volumes in history. A basic, non-nonsense version that stays true to the original.