Drones can also be remotely controlled using a control system for real-time route changes, mission aborts, emergency returns, and area patrol commands. Furthermore, based on their precise attitude control and location recognition capabilities, they can define and perform tasks such as recognizing specific objects and precisely landing at designated locations.

Mixed Signal Oscilloscope (4) Analog Channels, 10M record length, Certificate of Traceable Calibration Standard

- A white light mounted on the rear side of the aircraft to indicate the aircraft's location - These lights indicate the aircraft's position, flight direction, and attitude - Visible/IR Mode, Steady/Flash Mode - Light Intensity : FAA FAR 29.1391 ~ 29.1395 - SAE ARP 5825A

Lock Ring & Braid & Backshell

Engine Start Begins with ATS. The Air Turbine Starter (ATS) is a key component of an aircraft's secondary power system, driven by Bleed Air supplied from the Auxiliary Power Unit (APU) to accelerate the engine up to approximately 8,900 RPM, enabling engine start. Through the in-house development and localization of the ATS, we have incorporated power generation, optimal design of the shear section with consideration of failure, Containment functionality, as well as lubrication and power transmission systems. In addition, we have secured manufacturing and assembly technologies and continue development aimed at successful operation and the establishment of a mass production system.

DS AETHER CT provides various industrial Gas Tube Skids such as Hydrogen (H2), Helium (He), Neon (Ne), Nitrogen (N2) and Argon (Ar) as well as CNG. The working pressure is set to national requirements or customer's demands. The color of the jumbo tubes and skid frames follows ISO color codes or the designations of customers.

A next-generation Advanced Air Mobility (AAM) aircraft currently under development, designed with a separable upper platform and lower mission module structure. The interchangeable lower modules can be configured for passenger transport, cargo delivery, or reconnaissance missions, offering exceptional operational flexibility across various applications. As a large-scale platform, it embodies the future of modular air mobility, enabling rapid mission conversion, efficient maintenance, and cost-effective operation for both urban and regional air mobility sectors.

CoaXPress enables bidirectional transmission of data transfer, camera control, power supply (PoCXP), and triggering over a single coaxial cable. This product supports the following transmission standards. Designation Bit Rate ========== ======== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-4C amplifies and transmits image signals from 1/2/4-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.  4 CH x 1 Camera Configuration  2 CH x 2 Camera Configuration  1 CH x 4 Camera Configuration  2 CH + 1CH Camera Configuration