High Power Polarizing Beamsplitter Cube coatings are deposited on the hypotenuse of right angle prisms that are optically contacted. They are designed to separate an incident beam into its S and P polarization components with an average extinction ratio (TP/TS) in excess of 500 : 1. The incident energy is split into two orthogonally polarized beams that emerge at 90。with respect to each other. These coatings were developed specifically for use in high power pulsed and CW laser applications.

Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The CLR-30x2 transmits two independent sets of Base, Medium, or Full configuration Camera Link video signals (supporting up to 10 Taps per set) to a PC frame grabber. Each transmission layer can be configured independently .

Ray Service, headquartered in Staré Město, Czech Republic, is an international innovative manufacturer of cable harnesses, electromechanical assemblies, and electronic equipment. It is also a distributor and integrator of cable components and system products. More than 30 years of experience and intensive development have resulted in a strong, modern enterprise, a reliable and sought-after partner on an international level.

Modular and scalable, our Ground Combat Indoor Trainer’s (GC IDT) multiple configurations cover a rich variety of weaponry, including realistic small arms, support and anti-tank weapons. Highly realistic and durable replica weapons, a lifelike virtual weapons simulator and incredible accuracy combine to further enhance your troops.

High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

Powered by a single CR123 lithium battery, the ACTUS® ALD-1 Laser Sight offers 4 to 9 hours of runtime, depending on usage. Its robust all-aluminum housing ensures exceptional durability, while its compact size, similar to a standard deck of playing cards, makes it highly portable and convenient. The IR and visible lasers are optically paired, streamlining the zeroing process for quick, accurate adjustments and enhanced ease of use.

A VGA (640×480) LWIR (8–12 µm) uncooled micro-bolometer module with 12 µm pixel pitch and NETD ≤ 50 mK, paired with an F1.0, 10.7 mm EFL lens delivering H42° / V31.5° / D52.5° FOV. It streams at 30 Hz in either UVC (USB-C, 5 V) or GMSL1 (FAKRA, 12 V), with power consumption < 1.9 W. The compact, lightweight housing (30×30×58.9 mm for UVC; 30×30×70.9 mm with FAKRA for GMSL1; IP65; −40 °C to 85 °C) makes it well-suited for autonomous vehicles, UAVs, and security systems, providing reliable day/night thermal perception of pedestrians, animals, and objects in adverse weather.

STX Engine produces medium speed engine driven power generation equipment that can satisfy customers 100% by ideally combining medium speed engines, which have been collectively produced at our Changwon factory since obtaining licenses from the mid 1970's from MAN ENERGY SOLUTIONS in Germany and NIIGATA POWER SYSTEM in Japan, with a power generation system designed with rich experience in the area of system engineering. By installing diesel engine power generation equipment in locations across Korea and overseas, such as on islands, remote areas, resorts, etc., where no public power supply is available, as well as industrial complexes and hospitals which require good source of power, and factories receiving expensive public power supply, etc., our customers can confirm the investment effect within a short period of time after experiencing the power supply we make available to them, as well as low installation and operation costs and maximized availability of the equipment.