[Cutting by water jet] Micro water jet cutting: The micro water jet enables a refined process to be carried out in precision cutting. This high-precision technology reduces the jet diameter by a factor of 5 and makes water jet cutting more precise by a factor of 10. The micro water jet achieves a cutting accuracy of +/- 0.01 mm and a positioning accuracy of ±0.005 mm. The proven advantages of the cold cutting process remain unchanged. In the pure water process, the cutting width was reduced to 0.2 mm in the abrasive process for hard materials such as nickel-based alloys and titanium. The new technology controls the cutting process and manipulates the cutting path depending on the contour and speed enabling a highly precise cut. Standard waterjet cutting: Water jet cutting is highly efficient and at the same time less severe than other cutting techniques. Low process forces and thermal loads prevent bending or melting. We can cut filigree delicate contours from practically all nickel alloys and titanium alloys. Using our standard process we can cut a range of shapes and dimensions according to customer requirements and drawings and achieve tolerances of +/- 0.1 mm or +/- 0.2 mm.

Vulcanized Bonding - Complex Elastomer-to-Metal Bonding

Signaty X IR Helmet Strobe is a next‑generation, domestically developed IFF LED device. It features IR plus RGBW color LEDs (red, green, blue, white), all housed under a high‑strength polycarbonate dome. It supports multi‑wireless synchronization via short‑range communication, GPS/RTC, and mesh relay—enabling simultaneous use of RGB LED + IR or RGB LED + white LED, with up to 42 pattern synchronizations (expandable to 252) using 256‑bit encrypted data. Runtime reaches up to 130 hours (LED 130 h / IR 125 h) on a single AA battery. Built to MIL‑STD‑810G and KC standards, it ensures drop, dust, sand, immersion, and temperature resistance. Manufactured in Korea with domestic service support.

From briefing to touchdown and beyond, Fpo gives crews fully actionable recommendations on the most cost-efficient way to complete their flights under the current conditions, carefully balancing operational considerations with passenger comfort and on-time performance. Fpo holistically optimizes all phases of flight from climb to descent, relying on high-fidelity and real-time data to deliver information that is accurate, relevant and complete. Always raising the bar, we have partnered with Nexteon Technologies to introduce a multi-dimensional optimization solution, FPO•SR, which combines vertical and lateral flight optimization capabilities.

Auxiliary generator that can receive separate power without starting the tank

Inverter platform developed by entirely by Drive System Design with a focus on versatility and flexibility, resulting in a powerful and highly versatile hardware and electronics base platform, which can operate: - From 200 to 800V and beyond, - At a Continuous Output of 450A rms - Delivering an output Power up to 300kW and - A PWM frequency from 20 to 30kHz

The Cardinal 1280 is a high-definition SWIR InGaAs detector featuring a 10μm pixel pitch. This detector offers high resolution and sensitivity, enabling EO/IR systems to capitalize on the SWIR spectrum for low-light imaging and extremely long-range daytime surveillance, even in challenging weather conditions like smoke, dust, fog, or rain. It incorporates SCD's advanced Asynchronous Laser Pulse Detection (ALPD) technology. A Thermo Electric Cooler (TEC) is included for optimal performance of the Focal Plane Array (FPA) in low light level scenarios. SCD is committed to standing alongside our customers, ensuring they receive the finest solutions available.

40mm, 76mm, 105mm, 127mm, 155mm Proximity Fuzes Multi-Function Fuzes