This Control Actuation System (CAS) is a guidance system for unmanned flying objects. It consists of three MPS fin actuators that each independently position an aerodynamic fin. The maximum angle of incidence is ±8°, which allows the device to carry out highly precise dynamic manoeuvres. The miniature fin actuators that make up this Control Actuation System are manufactured by MPS Microsystems and were designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, these fin actuators meet strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

This system processes threat information across air, surface, and underwater domains, while providing video distribution, recording, and storage functions. It also interfaces with external equipment to enable efficient, fleet-wide operational control. - Compliant with MIL-SPEC standards (shock, vibration, temperature/humidity, EMI/EMC) - Equipped with a liquid-cooling system to protect internal components

The SC-HPCRTM is a Rear Transition Module (RTM) designed to extend the I/O functionality of the HPC2812 high-performance computing board. It can be mounted on the rear side of the VPX backplane to enhance system connectivity and I/O flexibility. Since the HPC2812 board consists of two computing nodes, the SC-HPCRTM provides dedicated interfaces for each node, including Ethernet, USB, MMCX, and Mini-HDMI ports, ensuring optimal data communication and display output performance in mission-critical embedded systems.

The IMX-5 delivers Tactical Grade Inertial performance powered by TWO of the most powerful GNSS receivers on the market. Inside the aluminum enclosure, this sensor is prepared to take you through difficult terrain. The IMX-5 provides sensor fusion for roll, pitch, magnetic heading, velocity, RTK precision position and Dual GNSS Compass Heading. Features Tactical Grade IMU Dual Onboard Multi-Frequency (L1/L2) GNSS Receivers Dual GNSS Compassing RTK Centimeter Level Precision Rugged IP40 Aluminum Enclosure Gyro: 1.5 °/hr Bias Instability, 0.16 °/√hr ARW Accel: 19 µg Bias Instability, 0.02 m/s/√hr VRW 0.04° Dynamic Roll/Pitch 0.13° Dynamic Heading Fast Integration with SDK and Example Software Data Logging (SDK and Application Software)

aviation fuel refueling cart : Mobile refueling cart that can easily refuel light aircraft and helicopters Sump recovery system : Collect the drained/sumped aviation fuel from the aviation fuel refueling system, easily sample and test it, and then decide whether to drain it or return it to the system. Aviation fuel refueling system : The aviation fuel refueling system is compactly constructed with a skid for easy use and installation.

Our firm offers end-to-end GaN production capabilities, including fabrication, packaging, test, and failure analysis to meet custom requirements. To enable customer designs, a process design kit (PDK) is available with a design manual, sample layouts, and a non-linear device model. Options available include fabrication of customer-designed wafers (“PDK foundry service”) or custom design by TransEON and fabrication according to customer specs (“NRE foundry service”). For either option, volume levels available include pilot/engineering runs, multi-project wafers (MPWs), or full production runs.

Small wind power systems and component components Durability technologies: Composites - nacelle, blades, corrosion protection Stability technology: and wind speed control (electrical) + tail folding (mechanical) High-efficiency system: Direct-drive PMSG - slotless, blades, coefficient of power (Cp): 0.429 MPPT (Maximum Power Point Tracker) : Maximum power following control Web monitoring: Real-time monitoring Easy to maintain and install Quality Assurance: More than 3 years System certification: New and renewable energy facility certification, new product (NEP), excellent product designation by the Public Procurement Service - Korea's first Element parts certification: generator, inverter-CE, blade static load test, demonstration test completed Annual average wind speed of 4.5m/s or more

It is designed to be suitable for difficult environments and can be applied to high torque and angle control. Applications are Missile defense, Torpedoes, Anti-drones system, Underwater drones.