The aviation industry was hit hard by the COVID-19 pandemic and is only now beginning to recover. We convened industry leaders from Honeywell Aerospace and asked what carriers can expect in the short-to-midterm as they emerge from the downturn.

Patrol Killer Guided Electro Optic Target System

Two-lug nutplate with bracket-retained nut element for FOD-critical applications where nut replaceability is desired but nut element retainer clips are not permitted. Supplied with integral elastic installation fixture. Fixture simplifies nutplate installation by providing bondline clamp-up and maintenance of concentricity with the fastener hole, ensuring full availability of nut float and protection of threads from adhesive.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

CP-10K (FIRE CONTROL COMPUTER) The computer for fixed-rate control consists of five processors for main control, communication, casting, console control, and shared memory, and performs the function of controlling guided missiles through the interface.

IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

Generates 2D electronic map images using a terrain database and transmits them to the mission computer via the ARINC-818 standard. Using Collins Aerospace's TERPROM software, enabling automatic terrain-following flight and terrain collision avoidance functions. - x2 Gigabit Ethernet - x1 MIL-STD-15583B - x4 Discrete Input - x2 Discrete Output - x4 ARINC-818 Transmit - 512GB Solid-State Disk (Digital Moving Map) - 64GB Solid-State Disk (TERPROM) - Size : 135.1x339.0x225.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 60W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G