Amphenol Ltd, is an innovator of interconnect solutions for the Aerospace and Defence markets. For over 60 years, Amphenols’ UK team have been producing innovative products for harsh environment applications globally.

BAE Systems is bringing together decades of demonstrated cross domain know-how and expertise in integrated flight controls and propulsion solutions to enable the next generation of aircraft. We are investing in the development of highly reliable, flight and safety critical systems that will enable the future of hybrid and all-electric aircraft.

- Provides accurate measurements of the trajectories of aircraft, guided weapons, separation of aircraft, and target encounters. - Using CW and FMCW

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m  In cases where a single PC cannot handle large amounts of image data, it becomes necessary to duplicate the image and use multiple PCs for processing. A splitter is required in such scenarios.  The CLS-30T2S amplifies and transmits image signals from a single camera to up to two PCs, supporting Base/Medium/Full configurations (10 Taps supported).  The Master side transmits RS232 and CC1~4 signals, while the Slave side replicates and transmits image signals only.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.

A distributed sensor system based on BOTDA (Brillouin Optical Time Domain Analyzer), capable of detecting structural deformation and external intrusion.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

Our in-vehicle monitoring solution applies VLM-powered indoor and outdoor cameras to deliver real-time driver and passenger awareness. By integrating AI models such as facial landmark and head pose detection, gaze tracking, object recognition, and human pose estimation, the system supports safety features like drowsiness detection, distraction monitoring, and surrounding object awareness. Optimized for automotive SoCs including Qualcomm, and running on QNX RTOS and Linux, our solution combines model compression, embedded optimization, and a streamlined development pipeline. This ensures reliable, low-latency performance tailored for next-generation connected and intelligent vehicles.