With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

I'd like to introduce is the “Lightweight 105 Self-propelled Howitzer,” which is unveiled in 2024. This model is mounted on the small tactical vehicle, showcasing the strong collaboration within Hyundai Motor Group. This product is applying 105mm artillery and can also be utilized on the battlefield with a command vehicle, firing vehicle, and ammunition carrier. This system is optimized for "Shoot & Scoot" tactics, as each vehicle weighs less than 7 tons and can be airlifted by tandem rotor helicopters like the CH-47 Chinook. The number of the crew has been reduced from six to four, which enhances its mobility and efficiency. It boasts a maximum firing rate of 10 rounds per minute and a range of 14.7 kilometers. This Lightweight 105mm Self-propelled Howitzer was completed firing test and currently in the final stages of developing with the government agency. I am looking forward to manufacturing mass production in 2026.

Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation XFrame® Dynamic Load Carrige® compatible Compatible with our entire accessories line Flush admin chest pocket with internal elastic straps PALS webbing for MOLLE attachment Zipper for Assaulter's Zip-On Back Panels QASM buckle system Holds up to five 5.56mm magazines Internal plate pocket retention straps accommodate several different plate thickness Soft armor included Composition Material: 500D Cordura® + ARAMID/PV® Size : Small / Medium : 8.5" x 11.5” -9.3" x 12.3" Plate Pocket Front Panel Area of Coverage : Length 13.25” Width 11" Large / XLarge : 10" x 13"- 10.9" x 13.8” Plate Pocket Front Panel Area of Coverage : Length 15" Width 12" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Based on our state-of-the-art facilities, the semi-conductor machinery component sector manufatctures parts including Chamber assembly, and Main Frame Assembly.

Product Information Frequency signal generator for high-performance, high-precision target detection High-frequency resolution design and frequency conversion function using DDS method main performance Frequency: L-Band ~ X-Band Pulse Mode, Low spurious Output Level: -10~+15dBm Range Spurious: -55dBc min Harmonic: -50dBc min Phase Noise: High Performance Frequency Sensibility: 50ppm max Port isolation: 70dBc Min Applicable fields High-precision targeting guided weapon tower system and radar system can be applied

Material: SS400-540, SPPS and ALDC1-8 Application Equipment: 60mm Mortar Purpose: Training for Prectice

The SWIFT-EI is the world’s first SWIR detector to feature a state-of-the-art read-out integrated circuit (ROIC), enabling low size, weight, power, and cost (SWaP-C). It supports VGA image format for SWIR imaging, multi-spot ALPD (asynchronous laser pulse detection), and a rapid imaging frame rate of up to 1,600 frames per second. The revolutionary ROIC introduces an independent neuromorphic imaging stream for event detection, which greatly expands capabilities in target detection and classification. Ideal for cutting-edge, low SWaP-C applications, the SWIFT-EI can be integrated into a variety of air platforms, missiles, vehicles, and handheld devices, making it extraordinarily versatile. With SWIFT-EI, SCD’s customers always have the advantage of being the FIRST TO SEE.

Seedcore’s VPX Chassis Housing Assembly is designed as a structural platform for Multi-function radar signal processing systems. Featuring a robust 8U 2×5 slot VPX configuration, precision-machined aluminum construction, and excellent thermal management, it ensures high mechanical stability and optimal heat dissipation in demanding defense environments. This chassis housing is deployed in Korea’s key air defense radar systems, including the L-SAM, M-SAM, and LAMD programs, supporting mission-critical radar signal processing architectures.