To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

In collaboration with Hanwha Systems, we developed and optimized a Transformer-based AI model for ship and aircraft detection on embedded platforms. Targeting NVIDIA Jetson Orin AGX, the project utilized the MSAR (640×640) dataset along with large-scale training databases built from public sources. The RT-DETR model, currently under review, was optimized through hardware-friendly design, Int8 quantization, and specialized inference acceleration. As a result, the solution achieved up to 5x faster inference speed while maintaining accuracy, reaching 20% of NVIDIA TensorRT performance. This demonstrates the ability to deliver reliable, real-time detection capabilities in resource-constrained embedded environments, enabling next-generation defense and surveillance applications.

The ENS2000 (Sub-6GHz 5G small cell) is a small cell capable of providing 5G services with a coverage radius of several hundred meters. It supports operator 5G bands such as n78 (3.5GHz) and n79 (4.7GHz) for private 5G. Originally developed for indoor use, but it can also be installed in enclosures such as streetlight cabinets for outdoor deployment when needed.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The MAGIC1A is a rugged 3U VPX SWaP-C3 high-performance embedded computer combining an Intel Xeon E3-1505M v6 CPU and NVIDIA Quadro P2000 GPU, offering strong compute performance, broad I/O, rugged resilience, and flexible software support. • Xeon E3-1505M v6 quad-core CPU + Quadro P2000 GPU → ~2.3 TFLOPS • Ethernet, USB, serial, MIL-STD-1553, ARINC 429, DisplayPort/DVI, GPIO; up to 8 TB removable SSD with fast-purge • MIL-STD rated, baseplate or fan cooling; −40 °C to +65 °C range • Supports Linux/Windows/VxWorks & CUDA/OpenCL/DirectX/OpenGL; includes AXIS software toolkit

In an uncertain world, L3Harris is anticipating and rapidly responding to challenges with agile technology - creating a safer and more secure future.

Ski-Doo·Sea-Doo·Can-Am 등 아이코닉 브랜드를 보유한 글로벌 레저 모빌리티 선도기업으로, 스노모빌·수상 레저·ATV/사이드바이사이드·3륜 모토사이클과 Rotax 엔진까지 폭넓은 제품군을 제공합니다. 방위 산업업체와도 협력을 모색합니다.

AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini N supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Extensive Interoperability Certus Mini seamlessly communicates with a wide range of industry standard protocols including NMEA 0183 and CANOpen making it easy to integrate into existing systems. Certus Mini effortlessly interfaces with ROS 1, ROS 2, and Ardupilot, streamlining your development processes for maximum efficiency and effectiveness.