High reliability KA series MIL-DTL-55302 compliant connectors offer signal contacts designed for demanding defense, commercial aerospace and space applications. The 2 and 3 row series are compliant to MIL-DTL-55302 and offer flexibility not available with other interconnects. The 4 and 5 row versions are also available and offer up to 490 contacts.

PILAR vehicle version is designed for the protection of heavy and light armoured vehicles, as well as police armoured vehicles. It is available as a tetrahedral acoustic array mounted on the vehicle roof. It can also include a display indicating the shot origin and identification. This system has been fitted on several hundred vehicles of the French Army and users on various theatres of operations (Afghanistan, Central African Republic, etc.) have been very satisfied.

The Fuel Heater is engine-mounted with fluid connections to both the engine fuel supply system and the engine lube oil system. The heater provides fuel heating for fuel de-icing, using engine lube oil flow during aircraft cold start and cold operation periods. REPAIR PROGRAM • Triumph has the expertise only the OEM can offer • OEM repairs are more dependable, increase MTBF and cost less long-term • Repair price is all inclusive • TAT 45 days approx

The maximum transmission distance varies based on the following frequency-related specifications. Camera Frequency Max Cable Length ================ =============== 20 ~ 60 MHz 10 m 60 ~ 80 MHz 7 m 80 ~ 85 MHz 5 m The PoCL Bypass function supports Power over Camera Link (PoCL) operation from the Frame Grabber to the selected camera. However, the power supply to unselected cameras is automatically disabled. To prevent power cutoff, separate power must be provided to the cameras. Configurations are available as follows, including image signal amplification. [Features of CLM-30C4]  Fully supports the Camera Link interface (Area/Line Scan).  Provides manual (switch) or remote (RS232) camera selection.  Allows selection from one of four cameras configured for Base (Layer 1) or Medium/Full (Layer 2) levels.  Supports Base/Medium/Full setups (CC1~4, RS232, LVAL, DVAL, FVAL)  PoCL bypass function: Automatically powers only the selected camera when PoCL-compatible cameras, frame grabbers, and cables are used.  Supports pixel frequency from 20 to 85 MHz.  Supports PoCL signal bypass (patented).  Enables lossless transmission.  Provides additional full-duplex RS232 communication at up to 256 Kbps.  Features a locking DC power jack (Molex).

- 3 axis Fiber Optic Gyroscopes / 3 axis MEMS Accelerometers - Operating Range: ± 490º/sec - Bias Repeatability(over temp. range) : ≤ 0.5º/hr (1σ, RMS) - In-run Bias Stability: 0.03º/hr (typical, 1σ) ≤ 0.05º/hr (max, 1σ) - Angle Random Walk : 0.025º/√hr (typical, 1σ) - Power Consumption: 5W @ 25℃ (< 8 W, @ - 40℃) - Input Voltage: + 5 V Lightweight Package: 790g (1.74 lbs)

The sky’s the limit with the Bell 505. A high-tech flight deck and adaptable cabin design make it an extremely cost-competitive, and capable for any challenge.

Outposts solutions allow you to extend and run native AWS services on premises, and is available in a variety of form factors, from 1U and 2U Outposts servers to 42U Outposts racks, and multiple rack deployments. With AWS Outposts, you can run some AWS services locally and connect to a broad range of services available in the local AWS Region. Run applications and workloads on premises using familiar AWS services, tools, and APIs. Outposts supports workloads and devices requiring low latency access to on-premises systems, local data processing, data residency, and application migration with local system interdependencies.

The focus on buy-to-fly ratios highlights the contributing role that near net shape processing can offer. This has undoubtedly been a driver in increasing this service offering from AMA. As a major contributor in the aircraft manufacturing supply chain, this is a key area of development for AMA and its companies. Customers are increasingly looking to optimise their production processes. This is primarily driven by the need to maximise their own spindle time for core business activities, with AMA therefore undertaking some of the machining processes. It can take many forms, from simple cutting to more intricate processing in which near net shape pieces are supplied. Even in AMA businesses whose business is predominantly transactional (so called ‘spot business’) rather than contractual, the processing element is increasing. Pre-machined kits of parts to individual specifications are becoming more commonplace. In addition to freeing up time for customers and OEMs to focus on more profitable final processing, near net shape processes can improve product quality, reduce variability and enhance component design functionality. As the industry continues to search for ways to lower buy-to-fly ratios and reduce the amount of waste, near net shape processing will have a greater role to play.