AI Navigation Algorithm The Certus Mini range features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. The algorithm was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS The Certus Mini range contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Reliability The Certus Mini range has been designed from the ground up for mission-critical control applications where reliability is essential. Built using a safety-oriented real-time operating system, all software is designed and tested to high safety standards with fault-tolerance in mind. The Certus Mini range is designed, manufactured and tested to military standards. L1/L5 Multi Constellation RTK GNSS The Certus Mini D supports L1/L5 dual frequencies, and GPS, GLONASS, Galileo, BeiDou and NavIC constellations. Access to multiple constellations and frequencies provides enhanced accuracy, availability and performance even in difficult environments such as multi-storey urban canyons. The GNSS receiver has 10 mm position accuracy with real-time RTK or post-processed PPK. Dual Antenna Heading The Certus Mini D provides a high accuracy heading solution using two GNSS antennas. The Certus Mini D rapidly and consistently maintains an accurate heading without the need for magnetic calibration and is unaffected by magnetic interference. Additionally, the system can determine heading while stationary. This makes it well-suited to applications where there is limited, or no, positional movement.

Vector AI provides real-time, high-resolution ISR data with minimal signature and a modular architecture that allows it to adapt to various mission profiles. With thousands of operational hours, including in active combat in the Ukraine, Vector AI is trusted by defence and security forces globally. Key Features: Up to 180 minutes of flight time Silent electric propulsion Fixed-wing performance with VTOL convenience AI-powered onboard computing and object recognition Open systems architecture for flexible payload integration Seamless switch to multicopter configuration using shared hardware

The operation of robotic inspection systems in an industrial environment requires a reliable control station. The second generation integrated control station -ICS 2- gives operators an all-in-one tool. Supplied in a rugged hardshell case (Pelicase®), embedded components such as a 21.5-inch touchscreen, high-performance PC or joystick can be selected according to industry standards. It also boasts a 10-year spare parts guarantee as well as extreme robustness and reliability even in harsh environments. Simplicity and ease of operation were key when developing ICS 2. The operator connects the robotic platform with one single cable and using the integrated joystick, operation is simple and self-explanatory.

The RFcore Radar series are FMCW type radar and were developed to detect/track small air targets. The major difference between three models is detection performance. RX32B is fundamental model. RX128B have four times larger radar than RX32B. RX192A have six times larger radar then RX32B. The number of the product name means the number of antenna elements. All have compact and lightweight physical architecture that concentrates all the components required for radar, such as antenna, RF components and radar signal processor, in a small single housing. Transport can be carried in the carrier box and can be easily carried by one person. For installation, you can use a commercially available camera tripod. The weight is about 7.5kg (RX32B) and 15.9kg (RX128B), and the lower connection part is compatible with the tripod connection for the camera. Power supply requires 12VDC (RX32B) and 24VDC power (RX128B and RX192A). When using a battery, it is possible to connect a 12V battery or 24V battery to radars. Usage time may vary depending on the battery capacity. RFCORE recommended the constant power supply. Transfer of Status and BIT information and simple control of the RX32B, RX128B and RX192A are possible with a web browser using the Ethernet connection for authorized users. Using the terminal program provided with the radar, you can view the radar control and detected target information in real time. All RX Radar series’ Power Amp and Core Chip were designed using RFcore's own products.

The PANDION Q650 is a versatile military and industrial drone, designed for easy maintenance and adaptability. Featuring a multi-mount bracket, it allows users to customize payloads such as speakers, searchlights, and LiDAR sensors to meet specific operational needs. Built for rugged environments, it is rated IP43 for water and dust resistance, ensuring durability in harsh conditions. The drone can perform missions with a flight time of approximately 40 minutes. Application : Day/Night Reconnaissance, Warning Sign Delivery, Automatic Patrol Mission, High-Res Photo/Video, Package Delivery (Under 1Kg)

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

WORKS is a powerful CAD utility suite developed by ZYX Technology, designed to enhance drafting productivity through automation and specialized tools. It includes over 450 features tailored for civil engineering, architecture, and general 2D drafting work. A key advantage of WORKS is its dual compatibility—it works seamlessly with both ZYXCAD PRO and AutoCAD Full versions, making it an excellent solution for organizations using diverse CAD environments. WORKS automates repetitive drafting tasks such as block insertion, layer control, dimensioning, annotation, and bulk editing. For civil engineering workflows, it offers advanced tools like terrain cross-sections, longitudinal profile creation, drainage design, and grading support. In architectural drafting, WORKS streamlines operations like door/window placement, wall dimensioning, floor labeling, and symbol standardization. These features reduce manual errors and improve consistency and output quality. Its smart batch-editing functions and preconfigured settings allow users to apply company CAD standards easily, reducing project setup time and improving team collaboration. All tools are organized in an intuitive ribbon interface, allowing both beginners and experts to maximize productivity. By minimizing repetitive work and standardizing key processes, WORKS dramatically improves drawing efficiency and accuracy. It is trusted by government agencies, educational institutions, and enterprises for large-scale design projects across Korea and beyond. Whether you're creating road plans, site layouts, floor plans, or technical diagrams, WORKS simplifies complex workflows and saves time without compromising quality.

Active phased array fire control radar (AESA) for aircraft A fire control multi-function radar (MFR) that can simultaneously detect, identify, and track multiple targets, including in the air and on the ground, and has SAR and NCTR functions. Aircraft (fighter)-mounted AESA radar is a core sensor for fighter jets to perform day/night/all-weather multiple missions. It operates in multiple modes such as air-to-air/air-to-ground/air-to-sea/support mode, and acquires ground images and air/ground in electronic warfare situations. It is essential mission equipment for fighter jets that detects/tracks multiple targets and supports guided missile guidance and gun shooting.