Titanium Grade 1 Strip Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 ELI Bars-Sheets and Plates Titanium Ti-6Al-7Nb Bars

Short-Wave Infrared(SWIR) Camera is an imaging device that detects reflected light in the 0.9–1.7 μm wavelength range. Compared to visible light, SWIR enables longer-distance observation and provides high-resolution imagery even in degraded visual environments, such as fog, haze, or dust, where conventional visible cameras cannot operate effectively. These capabilities are realized through the use of InGaAs sensors, offering precise detection and surveillance that are unattainable with visible-light imaging. Accordingly, SWIR cameras serve as an advanced imaging solution not only for military, security, and disaster response applications, but also for industrial inspection and research fields.

i3system’s line scanning X-ray detector platform, XID-C15DP/XID-C24DC, is a high performance and cost effective solution for dental panoramic, cephalometric applications. i3system’s direct type sensor ensures the most sharp images among the current products in the market. XID series is designed for compact size and easy installation. High DQE(Direct Quant㎛ Efficiency) enables high performance at lower dose of X-ray. Introduction Indirect type X-ray detector uses the scintillator and the photo-diode(CCD or CMOS sensor) for conversion of the X-ray into the light and for taking images espectively. But the light scatters and goes extinct during it passes through the scintillator and reaches to the CCD or CMOS sensor. As a result, it is inevitable to get blurred image. In the mean time, XID C15DP, direct type detector, converts X-rays into electronic signals directly without conversion process of light. Because X-ray is not converted into light, it provides much sharper images than indirect type detector. XID C15DP is designed to compact for easy installation. It provides Gigabit Ethernet port on the detector for easy configuration. Instead of Gigabit Ethernet, camera link or optical interface can be provided according to requirements of users.

FIRSTEC is providing key components of guided weapon, such as Actuation System, Gudiance Control Unit, Fire Control Unit, and wire harness, to complete systems such as Hyunmoo, Raybolt(Hyungung), Bigung(Poniard), M-SAM II(Cheongung II), L-SAM etc. applying them to each business.

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.

Powered by NVIDIA® Jetson AGX Orin™ SoM bundled with JetPack 5.1.1 Powered by NVIDIA® Jetson AGX Orin™ Industrial bundled with JetPack 6.0 Rugged -25°C to 70°C fanless operation (JAO32/ JAO64) - No throttling at 55°C with JAO64 MAXN Mode Rugged -40°C to 75°C fanless operation (JAOi) - No throttling at 50°C with JAOi MAXN Mode IP66 waterproof and dustproof Support 8x GMSL2 automotive cameras via FAKRA Z connectors (NRU-230V-AWP) 4x PoE+ GbE and 1x 10GBASE-T via M12 X-coded connectors 2x isolated CAN 2.0, 1x RS232, and 1x isolated RS485 via M12 A-coded connectors 1x system monitoring port by automotive-grade MCU 8V to 48V wide-range DC input with built-in ignition power control Compatible GMSL2 cameras with pre-built drivers

- Interior lighting used by removing it from the upper cockpit mount - Adjust the DIM/BRT brightness by operating the knob switch - NVIS WHITE per MIL-STD-3009

Pandion Perception provides a robust solution for autonomous navigation, Advanced Driver Assist (ADAS) and mapping in GPS-denied environments, efficiently generating the low-latency spatial data that every autonomous system needs. Mounted on ground vehicles or uncrewed platforms, our 3D spatial sensing systems enable operation environments where GPS is degraded or denied - such as dense urban areas, subterranean infrastructure, or contested military theatres. These capabilities are tailored for missions and logistics operations, offering reliability and precision where traditional systems fail.