Its unique tail-sitter design enables vertical takeoff and landing while maintaining fixed-wing efficiency during flight. The drone achieves high-speed performance and extended flight distances, making it ideal for wide-area monitoring. With its advanced endurance and adaptability, GOSHAWK delivers reliable intelligence in both tactical and strategic operations.

Each SCU can interface with up to eight (8) fuel probes with temperature detection and/or fuel probes with compensators. It will process capacitive and resistive readings to determine the fuel heights for each probe and transmit the calculated fuel volume to the cockpit.

MPS linear actuators are very compact, offer outstanding precision and can be adapted to the most demanding environments. The ball screws that make up these actuators give them a smooth, stick-slip-free linear motion. The diameter, motor, screw type and other elements of the linear actuator can be configured to your requirements.

This product supports the following transmission standards. Designation Bit Rate ========== ========== CXP-1 1.250 Gbps CXP-2 2.500 Gbps CXP-3 3.125 Gbps CXP-5 5.000 Gbps CXP-6 6.250 Gbps CXP-12 12.500 Gbps The CXR-2C amplifies and transmits image signals from 1/2-channel CoaXPress cameras to a PC frame grabber. Typically, transmission matches the distance between the camera and the device. Transmission distance depends on the coaxial cable type, and due to significant variability, specific distances are not provided.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

The fully redundant DA 30-HT-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The position sensor features a three channel design (for 2 out of 3 voting). Additionally, there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485.

The TAC-450 FOG offers exceptional performance in bias stability, scale factor, and angle random walk, and is available in nine configurations to solve the most challenging design projects. The TAC-450 FOG is ideal for air, land, or maritime stabilization and pointing applications. Due to its versatility, and accurate, reliable output, it can also be utilized in navigation, guidance, and control systems. Highlights Designed for maximum ease of integration with housed or unhoused (for OEM configurations) options Available in nine configurations to solve the most challenging design projects Exceptional performance in bias stability, scale factor, and angle random walk 1-, 2-, or 3-axis configuration, each employing the world’s smallest precision FOG Technology Details Photonic Integrated Chip Technology EMCORE’s photonic integrated chip (PIC) technology* reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s reliable and robust. With three of these integrated photonic gyros at its core, the TAC-450-360 IMU provides the safe, accurate performance autonomous platforms demand.