The ENS4000(Sub-6 5G Outdoor base station) is designed for outdoor services in the n79 (4.7GHz) band, providing coverage on the kilometer scale and enabling seamless private 5G service even in outdoor environments.

Our LiDAR uses a custom-designed laser that separates 1064 nm and 532 nm wavelengths from a single source, with two dedicated receivers capturing each set of data independently. Inside the system, the linear laser beam is refracted at a 10-degree angle through a prism to enable circular scanning. An RF module is also integrated for real-time equipment status monitoring. From circuit board design to component selection, every part of this system was developed in-house by multiple institutions. As a result, we have successfully eliminated reliance on foreign technology.

It is an UAV recovery system that lands a fixed-wing UAV even in mountainous terrain where there is no sufficient runway for landing. The UAV is damping through a net mounted on the vehicle and lands on an air-cushion mat. It has the advantage of being easy to deploy in places where vehicles can enter and exit. But the type of the aircraft capable of stable landing is limited.

- Installed on the fuselage or tail to provide flash lighting in a location that does not impede the visibility of position lights - The reflector rotates in an arc. - Flash Rate : 40 to 100 times per minute [cycle] - Effective Intensity : FAA FAR 29.1401 - SAE ARP 5825A

This unit(SOU) supplies sealing oil to prevent mixing of hydraulic oil and liquefied methanol gas inside of FBIV(Fuel Booster Injection Valve) when the main engine operates. SOU is divided into large bore main engine(60 bore over) and small bore main engine(50 bore below) type by the number of membrane accumulator. The main components consist of an oil tank, an electric motor, a hydraulic gear pump, an oil filter, a control block, accumulators, and various senses, transmitters and indicators.

The ACTUS® Laser Boresight is a precision device mounted directly onto the gun barrel, accurately indicating the exact aiming position of the muzzle. With a divergence angle of less than 0.6 mrad, it provides exceptional accuracy, making it an essential tool for precise alignment and target acquisition. The circular laser beam, with a 7.5 cm diameter, is visible to the naked eye from distances of up to 125 meters. The laser output is easily adjustable, offering versatility for use in various environments. Engineered for easy attachment to the gun barrel without causing any damage, the ACTUS® Laser Boresight also includes a remote harness for convenient operation from up to 4 meters away. Supporting 100-240V AC voltage, it ensures stable operation and excellent compatibility worldwide.

Its compact and robust design, coupled with a choice of analog, digital, and digital RS-232 outputs, makes the DSP-3000 the most versatile fiber optic gyro available and an ideal solution for guidance and stabilization, low-cost IMUs, integrated GPS/INS, and AHRS. Highlights EMCORE’s mature all-fiber optical circuit for exceptionally low noise (ARW) EMCORE’s proprietary E•Core polarization-maintaining fiber Robust, modular design housed in a package roughly the same size as a deck of playing cards Technology Details DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design is covered by multiple patents* and overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. *This product is covered by one or more patents, including U.S. Patent #6,429,939, “DSP Signal Processing for Open Loop Fiber Optic Sensors.” Feature Options Two Versatile Variants If you need a compact FOG with a powerful high-speed RS-422 interface with 1000 Hz asynchronous output, consider the DSP-3100 FOG. If you require a true RS-422 interface and a 1000 Hz synchronous output in a durable, shielded package, take a look at the DSP-3400.

The ACTUS® CORE-2 Dot Sight is a high-performance optical device chosen as the Warrior Platform Selection Equipment by the Republic of Korea Army (ROKA). Built to MIL-SPEC standards, it is a further development of our ACTUS® CORE-1 Dot Sight. Housed in a smaller form factor, the ACTUS® CORE-2 meets rigorous military requirements, including extreme temperature resistance, shock testing, waterproofing, and protection against fluid contamination. Designed for durability and reliability, the CORE-2 enhances operator safety in the field, ensuring quick and precise target acquisition during critical missions.