High impedance D-Sub connectors are designed to ground the outer shield of a twinax or quadrax contact directly to the shell of the connector. A multi-finger ground spring fixed around the shell provides a multi-point contact engagement that affords superior EMI shielding. The end result is an extremely low contact resistance when measured from the contact outer body to the connector flange, ensuring minimal RF noise and high durability of over 500 mating cycles.

The SC6G0 series supports 4K60 hardware compression and UVC video output, with power options via PoE or USB Bus Power. Its built-in SoC delivers 2.5 AI TOPS, enabling seamless YOLO AI tool integration. This design streamlines system setup and connectivity, boosting flexibility and deployment efficiency across diverse AV applications.

Developed as Korea’s first hydrogen-and-battery hybrid propulsion system, this next-generation eco-friendly aircraft uses electric batteries for take-off and hydrogen fuel cells for cruise flight, achieving a new standard in sustainable aviation. Recognized as a world-first intellectual property, this model also became the first hydrogen hybrid Advanced Air Mobility (AAM) aircraft in Korea to receive Special Airworthiness Certification from the Ministry of Land, Infrastructure and Transport in 2024.

WPGM0811100M is a 100W Gallium Nitride (GaN) Monolithic Microwave Integrated Circuit (MMIC). WPGM0811100M is useful for high power X-band Radar applications. Spec Frequency : 8-11GHz Saturated Output Power : 100W@9.5GHz PAE : 38.7% Power Gain : 29.5dB@9.5GHz Operating Voltage : 28-32V

Shock Tech designs, develops, manufactures and tests shock attenuation and vibration isolation systems for the most demanding environments. Customized solutions are provided with application requirements analyzation. Low Profile & Avionics Mounts are a series of all attitude, mid to high frequency, low profile mounts, used in a variety of applications including airborne avionics, etc. Bushing Mounts are a series of all attitude, low cost mounts, protecting against both vibration and shock, used in a variety of applications including airborne avionics, etc.

ABC designs and develops many components or functions to best meet the requirements of the needs in the special functions required in the test facilities. Essentially, these are hydraulic components that cover all types of fluids from very low pressure to very high pressure in a very wide scope of flow ranges.

Wing shells, side shells and fuselage sections are usually made of carbon fibre composites and glued together during the production process. With many components, a groove or an open edge remains after the bonding process, which must be filled or sealed. A modified two-component epoxy resin is often mixed and then applied manually. This often entails long production times and complex quality controls. Equally high material costs due to the processing of materials from cartridges. ViscoTec defies short pot life and materials that are difficult to handle: Thanks to a coherent overall system from material removal to material application, this process can be automated. The two components are taken separately from cartridges, hobbocks or drums and fed via hose lines to a two-component dosing system. Only at the very end of the process they are mixed in a static mixing tube and applied to the substrate (e.g. via a nozzle). The process is controlled and monitored by pressure sensors.

A fixed-wing unmanned aircraft equipped with VTOL (Vertical Take-Off and Landing) capability, enabling operations even in confined environments. It features a proprietary data link system supporting long-range communication, and a modular payload architecture adaptable for diverse missions such as surveillance, communication, and logistics. As a next-generation unmanned aerial platform, it is designed for wide application across both public and private sectors.