Engine Start Begins with ATS. The Air Turbine Starter (ATS) is a key component of an aircraft's secondary power system, driven by Bleed Air supplied from the Auxiliary Power Unit (APU) to accelerate the engine up to approximately 8,900 RPM, enabling engine start. Through the in-house development and localization of the ATS, we have incorporated power generation, optimal design of the shear section with consideration of failure, Containment functionality, as well as lubrication and power transmission systems. In addition, we have secured manufacturing and assembly technologies and continue development aimed at successful operation and the establishment of a mass production system.

Intel® 14th/13th/12th-Gen Core™ 24C/ 32T 35W/ 65W CPU Affordable IP66-rated design for waterproof and dustproof Up to 96GB DDR5 4800 SODIMM -25°C to 70°C wide-temperature fanless operation 3x 2.5Gb and 1x Gb Ethernet ports via M12 X-coded connectors, with 802.3at PoE+ option 1x waterproof USB3.2 Type-C port supporting alternative mode for DisplayPort and USB3.2 dual output 8V to 48V DC input with built-in ignition power control

AI Navigation Algorithm Certus features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. High-Performance MEMS Certus contains high performance MEMS sensors that are put through Advanced Navigation’s intensive 8 hour temperature calibration process. This provides the highest accuracy possible from this sensor class and outputs consistent accuracy over the full temperature range from -40°C to 85°C. Dual Antenna RTK GNSS Certus contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi-Protocol Support Certus features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

Monitors abnormal engine operation based on digital and analog signals from the aircraft engine. It calculates engine life indices and detects engine malfunctions for generate a Pilot Fault List (PFL), which will stored in memory. When an engine failure is detected, it provides warning for display on the Central Maintenance Panel (CMP). Developed as a replacement for obsolete, achieving 60% cost competitiveness compared to equivalent products. - x1 MIL-STD-1553B - x16 Discrete Inout - x14 Discrete Output - x3 Analog Input - x1 RS-232 - Size: 283 x 265 x 89 (mm) - Weight : 4.1Kg - Environment : MIL-STD-810G - EMI/EMC : MIL-STD-461G - Power : MIL-STD-704F (28VDC, 25W)

Woori DS Co., Ltd. has developed firmware for a cooling and heating air conditioning system that performs all controls, fault diagnosis and communication for heating and cooling control and positive pressure control inside an armored vehicle, and developed an inverter control device capable of controlling communication with the armored vehicle body system and monitoring error situations. We are developing products based on the best technology and competitiveness to satisfy customer requirements for electrical equipment required for armored vehicles. In addition, we have developed an air conditioning system blower durability test device that can test the durability of air conditioning blowers, and we have secured test and evaluation technology for blower durability by checking blower errors and performing cycle management. By continuously securing innovative technologies in the defense industry, we are expanding our electronic device development business to deliver new value and impress customers with the highest quality and trust from product design, development, and mass production.

Missions is the only commercially available analysis tool which brings together aircraft definition, aircraft performance and cost investigations in a single environment and delivers reliable projections of key metrics such as payload capacity, maximum range and direct operating cost. Excellent runtime performance and the integrated analysis environment ensure fast results even when dealing with large route networks.

Explore nanoscale structure with clarity, speed, and confidence. Tescan’s STEM solutions are purpose-built for advanced materials research, semiconductor analysis, and detailed nanoscale characterization. With integrated 4D-STEM, precession-assisted diffraction, and synchronized EDS workflows, our instruments deliver actionable insight with unmatched usability—whether you're mapping strain, analyzing phases, or accelerating failure analysis and R&D.

High-quality aerospace-grade aluminum forgings, produced from 6000 and 7000 series ingots sourced from reputable foundries. Our company specializes in forging and heat-treating to meet specific customer requirements, including ring and plate shapes, for defense industry applications.