An optimized Plasma FIB-SEM platform with proprietary gas chemistries for high-quality delayering of the most current semiconductor devices

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

SNT Motiv created the 'K Series', the strongest infantry firearm boasting the highest accuracy and destructive power, through pure independent technology development, and is fulfilling its mission of national security as the first line of independent national defense.

NICKEL 200 / 201 -Bars-Sheets and Plates-Tubes and Pipes NICKEL 270 -Sheets and Plates-Wire MONEL® ALLOY 400 -Bars-Sheets and Plates-Tubes and Pipes MONEL® ALLOY K-500 -Bars NILO® Alloy 36 -Bars-Sheets and Plates-Tubes and Pipes NILO® Alloy 42 -Bars-Sheets and Plates NILO® Alloy 48 -Bars-Strip NILO® Alloy K -Bars-Sheets and Plates-Wire INCONEL® Alloy 230 -Bars-Sheets and Plates INCONEL® Alloy 600 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 601 -Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 617 -Bars-Sheets and Plates INCONEL® Alloy 625 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 625LCF® -Sheets and Plates INCONEL® Alloy 693 -Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 -Bars-Sheets and Plates INCONEL® Alloy X-750 -Bars-Sheets and Plates INCONEL® Alloy C-276 -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy HX -Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 22 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 800 H / HT -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy 825 -Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy DS -Bars-Sheets and Plates INCOLOY® Alloy 330 -Sheets and Plates INCOLOY® Alloy A-286 -Bars-Sheets and Plates NIMONIC® Alloy 75 -Bars-Sheets and Plates NIMONIC® Alloy 80A -Bars-Sheets and Plates NIMONIC® Alloy 90 -Bars-Sheets and Plates-Wire-Strip NIMONIC® Alloy 263 -Sheets and Plates UDIMET® Alloy 188 -Bars-Sheets and Plates UDIMET® Alloy L-605 -Bars-Sheets and Plates Waspaloy® -Sheets and Plates

24-7 non-stop operating RADAR for ceaseless aerial surveillance and early trajectory detection. Design and Manufacture - Antenna Housing - Driving Unit

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

This miniature fin actuator manufactured by MPS Microsystems was designed based on customer specifications. Designed to guide a very small object and disposing of an extremely limited space, it meets strict requirements in terms of performance, weight - less than 100 g - and dimensions. To reduce the length of this actuator, MPS Microsystems used part of the screw length as the motor axis. This screw is equipped with a very compact 4-point contact bearing that simultaneously absorbs axial and radial loads. The angular play on the aileron axis is less than 0.1° rms. This actuator meets the storage and vibration requirements of military equipment.

항공 전자·소프트웨어 전문 기업으로, 항공기 현대화·통합·시험·인증까지 아우르는 맞춤형 항공전자 솔루션을 OEM·정부·공급사와 협업해 제공합니다.