Heat engine that converts combustion energy into mechanical energy. It consists of a compressor, combustion chamber, and turbine, and is widely used in aircraft propulsion.

For : Elevator Assembly Tool A320 Project 3.5m (L) x 1.5m (W) x 2m (H )

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

1. Operation / Full Management L2·L3 Switches - 1G 8 PORT, 12 PORT, 24 PORT - 10G (option) - WEB, CLI, Telnet, SNMP V2/V3 management 2. SWaP / Safety / Network 3. Design and supply customized interfaces according to the specific requirements of each system.

The core of the next-generation intelligent protection system Efficiency in the battlefield environment by building a highly intelligent weapon system with multiple spraying control technology for precise injection and remote control of multiple objects (intelligent mines), complex sensor-based intelligent ammunition design technology, and platform interlocking and cluster attack protection system integrated design technology. Development is underway to maximize effectiveness. Instead of conventional mines, we integrate technologies used in the 4th industrial revolution such as wireless power transmission, wireless communication, complex sensor control swarm control algorithm, and signal processing between location information, and develop the core technology of the intelligent mine system to efficiently operate the weapon on the battlefield. You can maximize the effectiveness of the system.

In high-reliability industries such as aerospace, defense, and nuclear, embedded software is emerging as a core competitive advantage, driving increasing demand for systems based on safety certification. Ansys SCADE is a model-based solution that supports the entire lifecycle of safety-critical software—from design to certification—for applications such as flight control systems, engine controllers, and cockpit display systems (CDS). It ensures high reliability, real-time performance, and safety compliance required for the development of complex avionics systems. Key Features - Model-based embedded software development and automatic code generation - Compliance with aerospace safety certification standards such as DO-178C, ARINC 661, and FACE™

The SC-DSPRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the DSP282A. When the DSP282A board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-DSPRTM board into the back of the Backplane. The DSP282A board consists of two computing nodes. To support this, Ethernet, USB, MMCX, and mini-HDMI ports are allocated to each node, and synchronization signal input ports can also be used simultaneously on both nodes.

The Bombardier Global 6500 aircraft is the go-to choice for the most demanding specialized missions around the world. Governments, militaries and operators choose this aircraft for its ideal combination of performance, reliability and flexibility, and because it is highly adaptable to outer mold line (OML) manipulation. The Global 6500 aircraft has class-leading power for mission equipment, over 18 hours of endurance, advantageous maintenance intervals and ample cabin space for workstations, patient transport and mission equipment.