High-power laser weapons targeting objects at 0.5 ~ 4.0km distances require optical components with sub-nm wavefront error precision. Our Company has successfully developed aspherical polishing and high-power laser coating technologies for Ø300 ~ 550mm optical components through defense project experiences. measurement technology 1) Laser Induced Damage Threshold(LIDT) - The evaluation to confirm the durability of optical components is called LIDT (Laser-Induced Damage Threshold), which is defined as "the maximum amount of laser radiation incident on an optical component when the expected probability of damage is zero" (ISO 21254). In other words, it represents the maximum intensity or power of laser that an optical component can withstand, making it a critical requirement in laser weapon systems. - Our company has established LIDT measurement technology and in-house facilities developed in accordance with ISO 21254 standards. When compared with LIDT test results from domestic and international companies during laser weapon system development, we have demonstrated measurement technology and accuracy that meets or exceeds industry standards. While overseas companies require more than one month for verification processes, our company can immediately provide reliable data through our LIDT system. 2) Cavity Ring Down Spectroscopy(CRDS) - When the reflectivity is 99.997%, this may not present significant issues in low-power laser applications. However, in high-power laser components, even the 0.05% of light that passes through the optical mirror can cause problems in vulnerable parts of the system, including rear optical instruments, bonded lenses, and control cables. Therefore, measurement and evaluation methods for high-reflectivity optical mirrors are extremely important. - Currently, the transmittance and reflectance of optical components are generally measured using spectrophotometers, but measuring reflectance levels of 99.5% or higher is not possible with this method. CRDS (Cavity Ring-Down Spectroscopy) technology is required to achieve measurement resolution beyond that of spectrophotometers, and our company has established this system to measure the reflectance of various optical components. This is a critically important technology for responding to high-power laser weapon system development requirements.

At trade shows around the world, Kallman’s flagship service, the Partnership Pavilion, is America’s full-service, business-to-business headquarters; the on-site hub of the U.S. and Canadian export community. The Partnership Pavilion covers Aerospace; Defense; Maritime; Medical; Mining; Oil & Gas; and Food industries. The Pavilion presents the perfect platform for business, maximizing U.S. and Canadian exhibitor exposure and creating a networking forum. Prime exhibit space & quality designs: Built on the idea that an organized group of exhibitors is easier to find than stand-alone booths scattered throughout a show, the USA and Canada Partnership Pavilions always attracts a crowd. Professional Amenities and Staff: Every USA and Canada Partnership Pavilion is staffed by an experienced event team dedicated to your success. Whether you need a liaison to the organizers, tech support, a contractor, caterer, translator, printer, or help tracking down a shipment... we’re here to help. Exclusive events and programs: As an exhibitor you have exclusive access to all Partnership Pavilion events; including our Opening Ceremony and Ribbon-Cutting, off and on-site hospitality receptions, business and market insight briefings, and special presentations.

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

Superior Performance: Stable braking power under extreme operating conditions, from taxiing to high-speed landings. Proven Reliability: Robust structures and advanced materials that guarantee long service life with minimal maintenance. Optimized Safety: Redundant design features and compliance with international aviation standards to meet the highest levels of operational safety. Custom Solutions: Tailored brake designs to fit the specific requirements of fixed-wing aircraft, rotary aircraft, and unmanned aerial platforms.

The family of PBS TJ40 turbojet engines features a compact design and excellent thrust-to-weight ratio. The engines are available in several versions incl. the PBS TJ40-G2 with high electric power output. Its distinctive features include simple and compact design, low weight and plug & play solution (all components including ECU integrated in the engine body). The engine weighs only 3.6 kg and provides a maximum thrust of 425 N.

This system product is a product that directly supplies and heats lubricant oil for smooth operation of the main engine cylinder’s metallic and mechanical movement. Lubricator, a product that supplies lubrication directly to the main engine cylinder liner, can control injection timing and consumption using an electronic control method that responds to the movement of the main engine piston. The alpha lubricator system is based on an algorithm controlling the cylinder oil dosage proportionally to the sulphur content in the fuel and, fuel consumption on particular load of engine. Minimum cylinder oil dosage is required to provide an adequate oil film and detergency properties. Everllence and WIN GD engines are currently applying the second generation Lubricator type, the Everllence type is Mk-I and the WIN GD type is Mk-ε (Epsilon).

It is a target drone that supports Live-fire training of various anti-aircraft weapon systems (Anti-Aircraft Gun, Guided Missiles, etc.) of the Army, Navy, and Air Force. Target drone take on the role of aggressor aircraft in training. When the target drone flies, the anti-aircraft weapon system participating in the training detects the target drone, conducts tracking training, and then conducts live fire to directly shoot down the target drone. In addition, we are developing services through anti-drone system (radar detection and tracking) performance testing and education/training based on the know-how and technology accumulated through live-fire training target drone operation services.

Aviation electrical system services As Korea's largest and most advanced wire harness and cable assembly manufacturer, Huneed Technologies produces simple to highly complex wire harness and electrical panel assemblies for global OEMs. Huneed Technologies provides cost-effective solutions for aviation electrical systems requirements and specializes in a wide range of low-volume production lines. With state-of-the-art equipment capable of laser wire marking, Huneed Technologies ensures high quality and cost competitiveness for system control, electrical conduction, testing and support for numerous aircraft and equipment platforms. Huneed Technologies provides Built-to-Print service that meets specifications for products of any size.