Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

The Transmit/Receive Module splits 2 transmit input channels into 32 output channels. Each channel delivers an output power of at least 3.2 W with a transmit efficiency of 35.5% or higher. It features independent phase control for each transmit channel. On the receive side, 32 input channels are combined into two output channels. The total receive gain is 34 dB or greater, and each channel supports individual gain and phase control. The noise figure is 3.5 dB or lower per channel. Built-in monitoring functions include internal temperature monitoring and output signal monitoring.

Additive manufacturing: - enables custom electronics cooling solutions, providing precise heat management, compact designs, and improved reliability for high-density electronic components. - battery coolers offer optimized thermal management, extending battery life, enhancing energy efficiency, and ensuring compact integration in electric vehicle systems. - allows for tailored cooling solutions for electric motors, improving heat dissipation, enhancing performance, and reducing system weight for efficient operation.

Key Features Enhanced speed and precision with a powerful 30W laser Supports a wide range of high-performance materials including Nylon 11, Nylon 12, and TPU Dimensions: 685 x 645 x 1065 mm Build Volume: 165 × 165 × 300 mm Weight: 114 kg (excluding build chamber or powder) Specifications 30W fiber laser Maximized powder reuse to minimize material waste ________________________________________

The single-board computer developed by Coats Technology is a core component that implements the performance of weapon systems and satisfies high reliability under environmental conditions such as temperature, vibration, shock, and EMI. It also performs data processing, integration and control of various onboard equipment through data buses, and communication functions to automate command and control, communication, computing, and information elements.

ElectroAir’s mobile APA-65 -series combined units consist of frequency converter units (AC rated output power up to 45 kVA) and rectifier units (DC continuous current up to 800A). These units are intended for the ground servicing of all aircraft types with a frequency of 400Hz and voltage 115/200 V and to power on-board electrical equipment and launch aircraft/ helicopters with a voltage of 28.5 VDC. APA-65 series is designed to eliminate CO2 emissions with its unique technical characteristics. Diesel hybrid unit and battery driven unit - unit can perform the complete service of aircraft at remote parking places with diesel engine / through batteries and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location. These units are very compact in size and weight.

The 6-degrees-of-freedom (6-DOF) motion platform system utilizes six types of motion—heave, roll, pitch, surge, sway, and yaw—to replicate real-world environmental movements and verify the operational durability and reliability of test products. Possesses Korea’s only proprietary 8-axis expansion technology (6-DOF + 2 additional axes), developed in-house. Duratek designs and manufactures fully domestic electric motion platforms, with integrated capabilities covering software control, user interface (UI), and sensor fusion technologies.