The R10s is a reconnaissance and surveillance drone capable of conducting up to two hours of mission flight, transmitting real-time information such as target location and scale to the ground control system. Based on the company’s innovative vertical take-off and landing (VTOL) platform “Bluebird,” the R10s is equipped with EO/IR optical sensors and a laser range finder for advanced target detection. Upon receiving mission orders, the R10s takes off vertically, transitions to fixed-wing flight, and proceeds to the designated area. Its onboard cameras and sensors identify and track targets, relaying precise coordinates to the ground control system. With modular wing replacement, the R10s can be configured for extended endurance of around two hours or for high-speed maneuverability, ensuring optimal adaptability and mission effectiveness across diverse operational scenarios.

Neustrelitz is located 100 kilometres north of Berlin. Here, DLR receives data from the German radar missions TerraSAR-X and TanDEM-X, the KOMPSAT satellites of the Korean Aerospace Research Institute (KARI), the European Sentinel fleet and the American Landsat series, among others. The multi-antenna and multi-mission configuration of the ground station allows information products to be delivered to customers within minutes after data reception. These include products for national and European authorities for maritime safety, such as wind and sea state estimates, ice classification, ship navigation through ice-covered waters, detection of navigation irregularities or oil spills as well as the space weather. The Neustrelitz ground station offers data reception in the S, X, and Ka bands as well as data uplink in the S and X bands.

The EMC-102 EDECU is configured as a common supervisory engine control for both T700-GE-701C/D and T700- GE-401C applications. Slated for use by the Army on current fielded models of Black Hawk helicopters, the control is configured with modern electronics, allowing for a more reliable alternative to the present Black Hawk control. The control unit is also compatible with the AH-64 Apache. The control is qualified to the latest Army requirements for superior operability in adverse environments.

The SC-SSGMRTM, a Seedcore Co., Ltd representative product, is a backplane transmission module that performs the I/O function of the SSGM(Synchronous Signal Generation Module). When the SSGM(Synchronous Signal Generation Module) board is plugged into the motherboard(Backplane) in front of the Chassis, you can extend the I/O function of the board by plugging the SC-SSGMRTM board into the back of the Backplane. Three 37-pin Micro D-sub ports are used to send synchronization signals generated by SC-SSGM to the outside or to receive external synchronization signals, Three separate MMCX output ports are prepared to support test equipment such as oscilloscopes, and you can convert them to various signals and output them.

Ekinox Micro combines a high-performance MEMS inertial sensor with quad-constellation, multi- frequency dual-antenna GNSS receiver to provide unmatched accuracy even in the most challenging applications. Designed to operate in the harshest conditions, Ekinox Micro is military standard compliant, making it the ideal choice for any mission critical application.

Supports non-destructive inspection of aircraft composite skin structures and is composed of a piezoelectric layer sensor, data acquisition equipment, and damage analysis software. Utilizes piezoelectric sensors to generate Lamb-wave and acquire signals, collecting data to accurately detect and assess composite damage. Visualizes inspection results on display such as damage location, size and index. - POD Accuracy: 1 inch 90% or more - POD Precision : Position error within 30 mm - 64 channels / 230 path reference detection time within 10 minutes - Sensor : Resonance resistance less than 400kΩ - Sensor : MIL-STD-810G - Sensor : RTCA DO-160 Section 23.0 - DAQ : x128 Piezoelectric sensor interface

The high-reliability DC-DC onverters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. SynQor’s innovative QorSeal® packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these converters operate at a fixed frequency, have no opto-isolators, and follow conservative component derating guidelines.

A gas container that stores ultra-high-purity nitrogen gas at high pressure and supplies it for seeker cooling when needed. It is designed to prevent gas loss even during long-term storage.