B Series incorporates the highly reliability Hypertac® hyperboloid contact which provides optimum performance in harsh conditions such as extreme mechanical shock and high mating cycles.

With a peak torque of >200Nm / 1770 lbf-in and a rated torque of 80Nm / 708 lbf-in, the fully redundant DA 58-D is the strongest, electromechanical, fully integrated (actuator control electronics, position sensing, motor and drivetrain in one housing) actuator in the market. Besides the well-proven redundant RS 485 interface, the DA 58-D also features a redundant CAN bus interface. The DA 58-D has been developed for applications with the highest reliability demands. The redundant – two channel – design of the actuator allows continuous operation even if one of the two channels has failed. All major components such as the electric motors, control and communication electronics, and power supply are available twice (redundant). The actuator features a triple-redundant position sensor (2 out of 3 voting). Additionally there are several sensors integrated to provide diagnostic information such as current consumption, supply voltage levels and temperature readings. All major components of the actuator are continuously diagnosed by the microcontrollers of the actuator and its health status can be read via the redundant RS485 / CAN interface.

Aviation piston, cylinder, airplane bolts and nuts Tank engine block , Tank nozzle and cover, single wiper driving unit, Balkan parts, composite wrench, 60mm mortar, 4.2inch mortar, 90mm recoiless rifle, 2.75"rocket warhead, 81mm mortar, target for shooting range

To complete their missions successfully in hostile territory, helicopters must have accurate, jam-resistant navigation systems that are able to operate effectively and dependably in all mission scenarios. These conditions may require high-speed, low-level flight over featureless, unknown terrain, and in the presence of enemy jamming.

PROJECTS KSS SONAR System KDX-III SONAR System Wire-Guided Heavyweight Torpedo Harbor Underwater Surveillance System (HUSS) ITEMS Transceiver cabinet assembly

MPS Microsystems offers a complete range of high precision ball screws for positioning less than 5 µm. Mostly custom-made, these screws ensure smooth and uniform movement resulting from the high precision of their thread, achieved by grinding. Our ball screws are made exclusively of stainless steel and are fitted with double nuts to allow fine adjustment of the axial play. Moreover, an optional ogival thread can provide a higher static and dynamic load capacity. Thanks to a large number of options, we can ensure that the ball screw meets your technical and quality needs. The following parameters can be personalized: lubricant (grease, oil, dry lubrication, no lubrication), customized screw ends, shape and external dimensions of the nut and screw, multiple nuts on the same screw, left-hand thread, thread length, specific axial play, special surface treatment, and more.

The new Super-TAC IMU integrates three fiber optic gyros that exceed tactical grade performance with three high-accuracy Micro-Electro-Mechanical Systems (MEMS) accelerometers and state-of-the-art support electronics in a single small, lightweight package. This solution addresses the need for superior inertial performance in a tactical- grade package, critical for operation in GPS denied and contested environments. The Super-TAC IMU measures change in velocity and angle, utilizing a configurable variable synchronous data link control (SDLC) digital serial bus. The Super-TAC is configured to offer customers the best value solution when designing new systems as well as provide the flexibility to upgrade existing platforms. The Super-TAC IMU employs state-of-the-art optics with fewer components, providing significant performance and reliability improvements across standard military environments. Background Emcore, located in Budd Lake, NJ has been designing, developing and producing inertial components, sensors and navigation systems for Space, Ground, and Avionic applications for over 35 years. Emcore has been developing Fiber Optic Gyros (FOGs) since the early 1990s, producing and delivering IMU products with performance ranging from tactical to strategic grade PERFORMANCE GYRO PERFORMANCE Bias Stability < 0.05 °/hr. (1σ) Angle Random Walk ( ARW) ≤ 0.01 °/√hr. (1σ) Scale Factor Repeatability ≤ 100 ppm (1σ) Scale Factor Linearity ≤ 50 ppm (1σ) Angular Rate Range 1,000 °/sec Acceleration Range 100,000 °/sec2 ACCELEROMETER PERFORMANCE Range ± 25 g Bias Variation ≤ 50 μg (1σ) Scale Factor Stability ≤ 300 ppm (1σ) SYSTEM PERFORMANCE Bandwidth (adjustable) 800 Hz (gyros) 150 Hz (accelerometers) MTBF >25,000 hr.

Based on the KN series MIL-DTL-55302 compliant connectors an ESA version of the KNB/KNC connectors has been created, which also offers signal contacts designed for demanding defense, commercial aerospace and space applications. They also are available in the 2 and 3 row series and offer flexibility not available with other interconnects.