Highest Productivity with reliable part quality • Maximize productivity by using up to 4 lasers, advanced scanning strategies and bidirectional recoating. • Maintain reliable part quality by using uniform gas flow and precise 3-axis scanner motions. • All features are designed with minimizing the cost per part in mind to maximize your profitability. Automation of processes and minimize job to job time. • For increased operational efficiency, powder handling, powder sieving are optimized. • The job to job time is minimized by using exchangeable build containers. Best in class volume • Offering uninterrupted 24/7 series production utilizing the segment‘s largest build volume and sophisticated powder management. • This allows for printing of a wide range of mid to large size fully functional components. Easy to Print with a wide range of materials • DLX enables the production of highly precise and high-quality printed parts with a wide range of materials. • Standard materials are Aluminium, Titanium, Copper, Inconel, Maraging Steel, Stainless Steel and more.

Jonal Labs specializes in high temperature and flame resistant aerospace seals from design assistance to final product and maintenance.

Best selling item in FS Flexible Input Voltage: 24V Improved Innovative noise and vibration Flexibility of target temperature: 55K, 80K, 110K, 130K Possibility adjusted for custom's requirements Used in various industrial fields of Defense and Commercial

Radio interference on telecommunications / broadcasting satellites operating in and outside of the country may result in degradation and interference of telecommunications / broadcasting. This system searches the interfering sources by TDOA / FDOA.

The ACTUS® IR Flashlight emits a low output of less than 100mW with a wavelength range of 830 to 875 nm, classified as a Class 3B laser. Designed for reliable performance in extreme environments, it can withstand specific storage and operating temperature ranges. Powered by a single CR123A lithium battery, it offers extended operational time, while its robust 6061-T6 aluminum construction ensures durability. The lightweight, compact design makes it easy to carry and use in the field.

A gas container that stores ultra-high-purity nitrogen gas at high pressure and supplies it for seeker cooling when needed. It is designed to prevent gas loss even during long-term storage.

- Compact size with built-in drive, position sensor, DC motor and gear box - Better durability & faster speed under similar rated load comparing to 12Lf series thanks to the bigger 17mm diameter DC motor - Position, current and speed control along with position & current feedback - Easy digital extended I/O control through 4 x Expansion I/O ports (No coding) - 27/37/50/87mm(*) stroke option (*): Each 3mm stroke can be added when adjusting the long stroke limit through Total Manager software. Rated load of 17N~70N depending on the lead angle for each stroke (Speed is inversely proportional to the rated load, so the higher the rated load, the slower the speed.) - RS-485 MODBUS-RTU protocol applied (IR open protocol is not provided) - Action feature which enables user’s motion save & run

To reduce aircraft development lead-time, Safran Engineering Services is specialized in quick design and engineering in full autonomy. Teams provide global loads for ground and flight maneuvers, follows the evolution of weight and center of gravity for aircraft components and support sales campaigns with weight & balance evaluation.