CP-10K (FIRE CONTROL COMPUTER) The computer for fixed-rate control consists of five processors for main control, communication, casting, console control, and shared memory, and performs the function of controlling guided missiles through the interface.

- Provides accurate measurements of the trajectories of aircraft, guided weapons, separation of aircraft, and target encounters. - Using CW and FMCW

< Frequency Range > ● LB-400: 400 ~ 460MHz ● LB-900: 800~928MHz ● MB-1500: 1300~1500MHz ● MB-2400: 2400 ~ 2500MHz ● HB-5.2: 5150 ~ 5250MHz ● HB-5.8: 5725 ~ 5875MHz < TX path output Power (at antenna port) > ● Normal mode: 35dBm [min] ● On each antenna port 2x 35dBm ● Interference mode: 40dBm [min] < TX path maximum Input Power > ● +20 dBm < RX path Gain > ● 25dB typ. < RX path Noise figure > ● Low bands: 3dB max. ● High bands 3.5dB max. < RX path IIP3 > ● -10dBm typ. < RX IP1dB compression point > ● 15dBm typ. < Power Supply > ● +24V ± 1 Vdc

- Swarm (Multicopter) : 20 Drones/ 1 swarm - Endurance : Rceonnaissance Drone: 23mim. / Loitering munition: 23mim. - MTOW : 2.4kg - Payload : 600g (Leader: EO/IR/LRF, Attack Drones : munition ) - Size : 300x360mm - Control Range : up to 5km

Global Wideband Connectivity for Mission Success Honeywell’s JetWave MCX satellite communications system delivers the world’s most advanced high-speed SATCOM capabilities needed for the most demanding mission profiles. It enables global in-flight broadband data connectivity on nearly any Ka-band network – including Inmarsat’s Global Xpress (GX) network, Wideband Global SATCOM (WGS), and other commercial and military Ka-band networks – making it truly network-agnostic for the most extensive global coverage. Built on proven, high-speed JetWave technology, JetWave MCX utilizes a wider frequency band (29-31 GHz Tx and 19.2-21.2 GHz Rx), offering access to commercial and military Ka-bands globally. And the dual polarity configuration provides increased bandwidth in high-traffic areas while meeting high-data uplink requirements that military and government operators require. JetWave MCX is designed with “future-proofing” in mind, exceeding current connectivity requirements while enabling expanded customer connectivity needs in the future. For the unique requirements of military and government operators, JetWave MCX can enable a wide variety of mission-critical applications, such as en-route mission communications, real-time weather, in-flight video conferencing, large file transfer, in-flight mission planning and briefings, ISR video transmission, and secure communications. We offer specialized data packages for ISR missions, making use of the increased upload speed capabilities. Single-IP address network-switching capabilities enable seamless connectivity for users globally, while access to resilient modem waveforms offers additional security and jam-resistance in hostile environments. JetWave MCX’s high-bandwidth capabilities can transform the aircraft into an “airborne communications node” by receiving data simultaneously from multiple sources – such as UAVs or ground forces – then processing and amalgamating the data for airborne Command and Control or for transmission to ground control. No matter the mission profile, JetWave MCX offers the resiliency, bandwidth, and network-agnostic capabilities needed to enable mission success.

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

We, STX Engine, started with our business to be designated as a defense company in 1977 and established a factory for defense purposes in 1988. Moreover, we have grown into a largest defense diesel engine manufacturer by licensing with MTU. Based on the aforementioned fact, we manufacture and provide diesel engines for main battle tank, self-propelled artillery and armored vehicle to ROK Army, for destroyer, frigate, patrol vessel and support vessel to ROK Navy, for patrol vessel to Korea Coast Guard as well.