Brazing is bonding two or more pieces of metal by means of flowing a filler metal between the joint interfaces at a temperature below the melting point of the base metal. The filler metal, upon cooling to the solid state, forms a strong metallic bond throughout the joined area. Through Dip-Brazing, RF Systems manufacture 1. Brazed Antennas 2. Brazed Waveguides 3. Brazed Divider / Combiner

Breathability and moisture protection Antibacterial/FR treated padding spacer mesh system Total system weight: 3.5 lbs. Pack Dimensions: 17" H x 8.5" W x 4" D LOA D carriage function Two front zippered compartments with 1" elastic loops Detachable shoulder strap PALS webbing for MOLLE attachment ELTONGATE D material life and wear resistance 500 Denier Cordura® nylon & 200 Denier Kevlar® 20% lighter than comparable products 7-10 times the strength of Cordura® nylon Scalable System – Each pack includes: MDX Small First Aid Pouch(HRN-ASP-MDX-SM) Size: 3.75” H x 8.5” W x 1.5” D • Quantity: 2 MDX Emergency Bungee Platform (HRN-ASP-MDX-DISC) Size: 6.5” H x 8” W • Quantity: 1 MDX Team Emergency Pouch (HRN-ASP-MDX-MP) Size: 6" H x 8" W x 2.5" D • Quantity: 1 MDX Large First Aid Pouch Size: 4” H x 8.5” W x 1.5” D • Quantity: 2 Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

The S10s, the first model of the PabloM series, is a loitering munition designed for strike missions. Leveraging mesh communication and AI-enabled swarm flight, it can execute both simultaneous and sequential self-destructive strikes against targets, effectively neutralizing diverse “anti-drone” systems. The S10s launches autonomously from a dedicated platform and can sustain flight for over 30 minutes, enabling wide-area operational coverage. When engaging a target, it performs a steep dive of up to 45 degrees at speeds reaching 150 km/h, ensuring rapid and precise impact. Built from lightweight foam-board materials, the S10s is optimized for fast, large-scale production during operations. Furthermore, its modular open-architecture design, aligned with the K-MOSA concept, allows mission payloads to be quickly swapped and integrated, delivering exceptional flexibility and interoperability in real combat environments.

Based on our state-of-the-art facilities, the semi-conductor machinery component sector manufatctures parts including Chamber assembly, and Main Frame Assembly.

To guarantee maximum safety and reliability, our DA 30 features a brushless motor and a contactless wear-free position sensor. This means maximum service life with the greatest‐possible power delivery and its design prevents electromagnetic emissions (EMI) caused by brush sparking. The housing made of saltwater‐resistant aluminum is HART‐coat treated, meets the IP‐67 standard for water and dust sealing and provides an integrated Sub‐D connector (MIL spec. circular connector or cable gland on request). Brackets integrated in the housing for horizontal and vertical assembly. 8‐fold, ball‐bearing supported, steel gear train, drive shaft with ANSI multi‐tooth. The DA 30 series can be equipped with a standard PWM input (Pulse Width Modulation) that has two different interfaces: a differential, galvanic isolated interface (Opto‐Coupler) and a single‐ended interface with CMOS levels that is also used to program the servo parameters. It includes analog position feedback to detect the drive shaft position. A differential RS‐422 PWM interface can be chosen instead of the opto‐coupled interface. The DA 30 with digital serial command interface (RS‐485) receives its commands via a CRC secured protocol. It can return not only the shaft position in digital format, but also several diagnostic data such as the level of the supply voltage, current consumption and the temperature of the motor and electronics in digital form (optionally also the humidity within the actuator case). These kind of diagnostic capabilities help to determine the health state of the actuators before, during and after deployment.

Quapason™ is a high-performance vibratory gyroscope from Safran Electronics & Defense, combining the compactness of MEMS with the reliability of Fiber-Optic Gyroscopes (FOG). It delivers exceptional robustness, ultra-low noise, and high signal stability, making it ideal for stabilization and inertial navigation in harsh environments. Used in weapon turret stabilization, avionics, and artificial horizons, it has surpassed 140,000 units delivered, proving its reliability and precision across civil and military applications.

APA-110 is designed to eliminate CO2 emissions with its unique technical characteristics. It can perform the complete service of aircraft at remote parking places with diesel engine and it is also capable to operate from the 50/60Hz, 400V, 3 phase main power supply grid as any electrical GPU, without fuel consumption and with zero operating emissions. The range of different APA configurations with no emissions allow for safer, cleaner and more practical operational conditions for operators and personnel at the location.

DIESTONE DLV is a next-generation cleaning solvent for aerospace and industrial surface preparation. With 70% VOCs, controlled volatility, low odor, and no chlorinated hydrocarbons, it ensures operator comfort and safer workshops. Its high flash point (49 °C / 120.2 °F) reduces fire risks while maintaining powerful cleaning and degreasing performance on metals and composites. Non-corrosive on light alloys, DIESTONE DLV also provides reliable reactivation of epoxy and polyurethane primers before painting, bonding, or sealing. Approved to key aerospace standards, including Boeing BSS 7432 and SAE (ARP1755B, AMS1528, AMS1536), it is trusted by OEMs and MROs worldwide. Available in multiple packaging formats, from bulk containers to pre-saturated wipes, it offers flexibility for both manufacturing and maintenance operations.