IP66-rated waterproof and dustproof design Intel® Alder Lake Core™ i3-N305 with 8 E-cores -40°C to 70°C temperature operation 2x 2.5GbE via M12 X-coded connectors 1x isolated RS-232, 1x isolated RS-422/485 via M12 A-coded connectors 3x isolated DIO and 1x CAN2.0B via M12 A-coded connectors Low power and high endurance FRAM for data logger Class 1, Division 2 and ATEX certification in hazardous area applications 8V to 35V DC input with ignition power control input via M12 A-coded connector

Ultra-High Accuracy MEMS Certus Evo features some of the highest accuracy MEMS accelerometers and gyroscopes currently available. Certus Evo’s inertial performance exceeds some FOG IMUs and is up to 100x smaller and 10x cheaper. Certus Evo is put through Advanced Navigation’s intensive calibration process to provide consistently accurate data over an extended temperature range of -40°C to 85°C. AI-Based Algorithm Certus Evo features Advanced Navigation’s revolutionary AI neural network sensor fusion algorithm. It was designed for control applications and has a high level of health monitoring and instability prevention to ensure stable and reliable data. Dual Antenna RTK GNSS Certus Evo contains a dual frequency RTK GNSS receiver that provides up to 1 cm accuracy positioning and supports all of the current and future satellite navigation systems, including GPS, GLONASS, GALILEO, BeiDou and QZSS. Dual antenna heading provides high accuracy heading that is not impacted by magnetic interference and has no motion requirements. Time Synchronization Certus Evo contains a GNSS disciplined oscillator that can act as the primary time source within a distributed time system, enabling access to ultra-accurate system time using PTP or NTP network time sync. Certus also has a high-accuracy 1PPS and frequency output. Multi Protocol Support Certus Evo features multiple interfaces including Ethernet, CAN, RS232, RS422 and GPIOs. Certus supports all the industry standard protocols including NMEA 0183, NMEA 2000, TSS, PASHR, Simrad as well as a wide variety of proprietary protocols. It features a rich web UI and 256GB of internal logging.

The GCS is an all-in-one portable Ground Control System designed to command swarm UAVs in diverse field environments such as military operations or outdoor performance venues. Depending on the operator’s mission environment and purpose, three type options are offered: HardCase, Shelter, and Tablet. The HardCase GCS is optimized for outdoor operations, featuring a 1,000 cd/m² high-brightness touch monitor with anti-glare and anti-fingerprint (AG + AF) coatings for enhanced usability. Dual monitors are equipped as standard for multi-UAV control, with the option to expand to additional displays. It integrates a high-capacity internal battery, 220 VAC power output, real-time system monitoring, and an automatic cooling system, enabling stable operation without additional setup in any environment. Furthermore, multiple interface ports—including USB, USB-C, and HDMI—provide broad compatibility with diverse devices.

The L Series comes with frames in various lengths to accommodate a variety of module combinations. The frames range from a basic frame with just 2 side rails and 2 end caps, to more complex versions with jackscrews, backshells, cable clamps, etc.

Versatile, high density 4 contact row connector solution for board to board and wire to board with built in coding and keying as well as ESA qualification. With a 0.6mm contact diameter, CMD connectors are available from 42 to 316 contact positions with dip solder and SMT soldering contact termination types.

DS AETHER CT provides various industrial Gas Tube Skids such as Hydrogen (H2), Helium (He), Neon (Ne), Nitrogen (N2) and Argon (Ar) as well as CNG. The working pressure is set to national requirements or customer's demands. The color of the jumbo tubes and skid frames follows ISO color codes or the designations of customers.

Powered by a single CR123 lithium battery, the ACTUS® ALD-1 Laser Sight offers 4 to 9 hours of runtime, depending on usage. Its robust all-aluminum housing ensures exceptional durability, while its compact size, similar to a standard deck of playing cards, makes it highly portable and convenient. The IR and visible lasers are optically paired, streamlining the zeroing process for quick, accurate adjustments and enhanced ease of use.

Continental connectors are manufactured with highest quality materials. Our contacts are machined to close tolerances as opposed to stamped and formed styles. All molding compounds are glass reinforced, flame retardant and able to withstand severe environmental and mechanical requirements. Military connector families conform to the highest Defense Supply center (DSCC) standards, which require qualification testing and continued periodic requalification under the surveillance of government representatives to maintain our Company Qualified Product Listing (QPL)