ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

Temperature Calibrated Pressure Sensors The Air Data Unit features very high accuracy absolute and differential pressure sensors. These are factory calibrated over a wide temperature range to further increase measurement accuracy and provide the best air data possible through varying conditions. Power Up Self-Calibration On top of factory temperature calibration, every time the air data unit powers up, it performs a self excitation calibration to adjust for small deviations of bias and scaling error. This allows the system to compensate for calibration aging and means that it never needs to be returned to the factory for recalibration. Reliability The Air Data Unit is built on top of a safety oriented real time operating system and all software is designed and tested to safety standards with fault tolerance. Its communication interface is optically isolated and the hardware is designed and tested to MIL spec.

The I-TRAC was developed as a personal identification marker, to provide both infrared and overt lighting. This multi-LED portable infrared/visible strobe light was designed to mount onto helmets, webbing, or any hook and loop surface. For use as an Identification-Friend-or-Foe (IFF) or Every-Day Carry (EDC) safety identification.

With durable constructions, GORE-FLIGHT Microwave Assemblies provide reliable performance for critical aircraft systems. To improve signal integrity and reduce interference, they incorporate shielding that meets and even exceeds the 90 dB requirement. A consistent impedance of 50 ± 1 ohms ensures a lower insertion loss and more reliable VSWR than leading competitors, both before and after installation. GORE-FLIGHT Microwave Assemblies also deliver the following benefits: Durability for the Life of the System Cost-Saving Performance

- Minimizing the station's door opening and closing time to support drones' quick entry and exit. - Structural design to minimize noise and vibration when opening and closing the door - Design and implementation of an interface for interaction between an automatic door system and a drone. - Automatically opening and closing door system - Automatic detection of drones through cameras and sensors, and safe storage and charging functions

Built with a rugged design and clear display, the TACNAV UMD offers: Highlights Active dot-matrix design, delivering unparalleled flexibility User-friendly interface with easy-to-read icons, messages, and pop-up menus Features Generation III NVG (night vision goggle)-compatible Four “soft keys” for easy operation Interchangeable with both Commander’s and Driver’s Displays, reducing logistics and cost Military standard approved for outstanding performance and reliability Ideal for integration into digital Battle Management Systems Compatible with all existing and future EMCORE TACNAV systems Applications Military vehicle requiring a user-friendly interface for its tactical navigation system The TACNAV UMD is controlled by the Arms Export Control Act (Title 22, USC Sec 2751 et seq.) and the International Traffic in Arms Regulations, ITAR 22 CFR 120-130, and may not be exported from the United States or disclosed to a foreign person in the United States except as authorized by those regulations.

Developed in 2002 as a single-soldier, short-range, anti-tank weapon system, we continue to work with soldiers to provide the weaponry needed to succeed. Backed by nearly two decades of experience, the resurgence of the tank in battle validates our expertise in this field. It’s the same old story – and David still beats Goliath.

Rolatube Tripods are purpose-built for applications where mobility, speed, and performance matter. Constructed from Rolatube’s patented rollable composite material, each tripod offers a durable yet lightweight structure that rolls or folds down for easy transport and storage. Designed to support a range of payloads and mission profiles, the lineup includes the highly portable System 30, versatile Industrial Compact Tripod, and robust System 50 Tripod MIL for demanding field operations. These tripods are engineered for rapid deployment and compatible with Rolatube masts or other payloads requiring stable elevation. Their corrosion-resistant build, compact footprint, and tool-free setup make them ideal for communication, surveillance, and sensor support across defence, emergency response, and industrial sectors.