The SCXMC-HDLC card operates through the XMC interface of the SBC and provides real-time communication for control and status data based on synchronization signals. It supports serial communication via the SBCRTM’s Micro D-sub 37-pin connector using a standard D-sub 9-pin interface, allowing long-distance transmission through LVDS signaling. With four transmit/receive channels, it achieves 1–8 Mbps per channel and delivers low-latency performance of less than 40 µs for real-time operations. A device driver program is required for operation, and the Linux driver can be downloaded from Seedcore’s product page. Drivers for other operating systems can be developed upon request. This module is deployed in the L-SAM multi-function radar system, enabling fast and reliable control data communication across mission-critical components.

Hydration port 2" Padded lumbar support Internal retention straps PALS webbing for MOLLE attachment Drag handle Antimicrobial/FR treated padded spacer mesh Top Front Exterior Pocket : 12.5" H x 9" W x 2.75" D Bottom Front Exterior Pocket : 10.5" W x 7.5" H x 2.75" D External Side Pockets : 11" H x 6.5"” W x 1.5" D Mesh Pockets : 10" H x 8" W & 7" H x 12.5" W Cubic Liters : 47.83L Dim. : 25" H x 13" W x 9" D Composition Material : 500D Cordura® + ARAMID / PV® Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Hermetic connectors are a special class of sealed Mil /Aero interconnect that incorporates glass-to-metal or other highly-engineered sealing technology. Hermetic seal connectors are specified for applications as divergent as submarines and orbiting satellites. They are deployed to resist moisture ingress in underground applications and to withstand pressure differentials in vacuum chambers, laboratory equipment and commercial and military aircraft. Hermetic seal connectors, such as the MIL-DTL-38999 Series I, II, III and IV supplied by Glenair, are principally designed for use in military aerospace — in fact, the sealing requirement for connector hermeticity was originally driven by military electronic applications. But the products are equally at home in commercial applications such as oil-patch, logging equipment or medical devices.

NILO® Alloy 36 Bars-Sheets and Plates-Tubes and Pipes-Strip-Wire NILO® Alloy 48 Bars-Strip INCONEL® Alloy 230 Bars-Sheets and Plates INCONEL® Alloy 600 Bars-Sheets and Plates-Tubes and Pipes-Wire INCONEL® Alloy 625 Bars-Sheets and Plates-Tubes and Pipes INCONEL® Alloy 718 Bars-Sheets and Plates INCONEL® Alloy X-750 Bars-Sheets and Plates INCONEL® Alloy HX Bars-Sheets and Plates-Tubes and Pipes INCOLOY® Alloy A-286 Bars-Sheets and Plates NIMONIC® Alloy 75 Bars-Sheets and Plates NIMONIC® Alloy 80A Bars-Sheets and Plates NIMONIC® Alloy 90 Bars-Sheets and Plates-Strip-Wire NIMONIC® Alloy 263 Sheets and Plates UDIMET® Alloy 188 Bars-Sheets and Plates UDIMET® Alloy L-605 Bars-Sheets and Plates Waspaloy® Sheets and Plates Titanium Grade 2 Bars-Sheets and Plates-Tubes and Pipes Titanium Grade 5 (6Al-4V) Bars-Sheets and Plates Material no. 1.4545.4 / 15-5PH Bars Material no. 1.4548.4 / 17-4 PH Bars Material no. 1.4546.9 Bars

Our PIT systems are built to withstand the toughest weather conditions and meet international aviation standards. Our versatile configurations are tailored to your operational needs - from compact access units to advanced pop-up mechanisms. PIT system types: MINIPIT Hatch Systems – Compact and simple underground solution for smaller aprons or light traffic zones. Standard Hatch PIT Systems – Durable and reliable access pits for electrical, fuel, and IT systems under the apron. Pop-Up PIT Systems – Mechanized lifting PIT system for convenient and fast surface access when needed. Each system offers specific advantages depending on the scale, type of aircraft, and regional standards of your operations.

The new Super-TAC IMU integrates three fiber optic gyros that exceed tactical grade performance with three high-accuracy Micro-Electro-Mechanical Systems (MEMS) accelerometers and state-of-the-art support electronics in a single small, lightweight package. This solution addresses the need for superior inertial performance in a tactical- grade package, critical for operation in GPS denied and contested environments. The Super-TAC IMU measures change in velocity and angle, utilizing a configurable variable synchronous data link control (SDLC) digital serial bus. The Super-TAC is configured to offer customers the best value solution when designing new systems as well as provide the flexibility to upgrade existing platforms. The Super-TAC IMU employs state-of-the-art optics with fewer components, providing significant performance and reliability improvements across standard military environments. Background Emcore, located in Budd Lake, NJ has been designing, developing and producing inertial components, sensors and navigation systems for Space, Ground, and Avionic applications for over 35 years. Emcore has been developing Fiber Optic Gyros (FOGs) since the early 1990s, producing and delivering IMU products with performance ranging from tactical to strategic grade PERFORMANCE GYRO PERFORMANCE Bias Stability < 0.05 °/hr. (1σ) Angle Random Walk ( ARW) ≤ 0.01 °/√hr. (1σ) Scale Factor Repeatability ≤ 100 ppm (1σ) Scale Factor Linearity ≤ 50 ppm (1σ) Angular Rate Range 1,000 °/sec Acceleration Range 100,000 °/sec2 ACCELEROMETER PERFORMANCE Range ± 25 g Bias Variation ≤ 50 μg (1σ) Scale Factor Stability ≤ 300 ppm (1σ) SYSTEM PERFORMANCE Bandwidth (adjustable) 800 Hz (gyros) 150 Hz (accelerometers) MTBF >25,000 hr.

ZYXCAD is a high-performance CAD software developed by ZYX Technology, offering full compatibility with DWG files and optimized for speed, stability, and usability. It is designed for professionals in architecture, engineering, construction, manufacturing, and defense who require precise and efficient drafting tools. With support for multi-core CPU processing and memory optimization, ZYXCAD ensures smooth operation even when working with large-scale drawings or on long, complex projects. Its fast load times, intuitive interface, and powerful engine allow users to focus on design without interruptions. A key advantage of ZYXCAD is its flexible licensing system. While many CAD platforms are available only as annual subscriptions, ZYXCAD offers both rental and perpetual licenses, giving users more freedom to choose the option that best fits their business needs and budget. The PRO version of ZYXCAD comes bundled with WORKS, a powerful suite of over 450 built-in productivity tools. These tools enhance drafting efficiency by automating repetitive tasks such as block insertion, layer management, dimensioning, and batch editing. With WORKS, even complex tasks become faster and easier, reducing errors and improving project turnaround times. ZYXCAD also supports various file formats beyond DWG, including DXF, DWF, DGN, PDF, STEP, and IFC, ensuring seamless collaboration and compatibility in diverse work environments. As a trusted CAD solution used by government agencies, universities, businesses, and defense-related institutions, ZYXCAD continues to grow as a competitive and reliable alternative to expensive legacy CAD systems. It combines professional-grade performance with cost-effectiveness, making it ideal for teams seeking to modernize their design workflows without compromising quality or functionality. Whether you are transitioning from other CAD platforms or looking for a better way to manage your design tasks, ZYXCAD offers the tools, speed, and flexibility to help your organization succeed in today’s fast-moving digital landscape.

HPH series is a high density interconnect available up to 303 contacts with multiple hardware choices and backpotting option.With a 0.6mm contact diameter, the HPH Series comes in 3-6 row configurations and is available up to 303 signal contacts on a 1.901mm staggered grid. Contacts are removable for ease of maintenance.