MOHOC® 2 builds on the success of the original MOHOC Camera with enhanced performance, improved usability, and modernised tactical integration. Purpose-built for defence, law enforcement, and emergency response professionals, the MOHOC 2 retains the patented helmet-contoured design and snag-free profile while introducing upgraded imaging, improved low-light sensitivity, and extended networking capabilities. Designed to perform in the harshest operational conditions, MOHOC 2 is IP68-rated, MIL-STD-810 tested, and capable of surviving 10 m submersion and 2 m drops. It delivers Full HD video at 60 FPS, high-resolution stills, and supports long-duration recording through external power sources. The camera operates silently with no flash or shutter sound, and offers multiple mounting options for helmets, MOLLE, and rail systems. With support for Wi-Fi control, stealth recording, and infrared capability in the IR model, MOHOC 2 is a mission-ready video solution built for today’s connected battlefield.

Aviation piston, cylinder, airplane bolts and nuts Tank engine block , Tank nozzle and cover, single wiper driving unit, Balkan parts, composite wrench, 60mm mortar, 4.2inch mortar, 90mm recoiless rifle, 2.75"rocket warhead, 81mm mortar, target for shooting range

1. Comprehensive Manufacturing • Prototyping to serial manufacturing • Structure Assembly and Wire Harness • System Integration - Motors, Flight Control System, Inverter, etc. 2. Multi-Mission Drones • Precise Attack Drone • Heavy Lift Drones ( Cargo/transport) • Firefighting/ Rescue Drone Highlights Experienced in prototyping and manufacturing drones for diverse customer requirements.

Poongsan has been producing a variety of copper and copper alloy plates, ranging from copper products for everyday life to high-tech industrial materials. These copper and copper alloy plates, which are recognized as high-quality materials at home and abroad, are representative industrial basic materials that are widely used in all industrial fields, including automobiles, electrical and electronics, semiconductors, communications, construction, and machinery. Poongsan has various casting facilities, including the world's largest shaft furnace, a hot mill capable of continuously rolling 6-ton slabs, a tandem mill, and a 20-stage cold rolling mill, as well as various hot and cold rolling facilities and heat treatment furnaces. We are building a large-scale integrated production system from the casting process to finishing processes such as cutting and packaging. Poongsan's rolled products are produced in various sizes depending on the type, ranging from 630mm in width, 0.03mm in thickness, and thickness tolerance to 2/1000mm. These products have accurate specifications and physical properties and a smooth surface thanks to the establishment of a thorough quality control system using cutting-edge inspection equipment. Excellent. Poongsan's copper and copper alloy rolled products are produced in a variety of ways, including pure copper, brass, phosphor bronze, nickel silver, cupronickel, and special alloy (PMC26 and other) depending on the alloy composition and casting method. In particular, in response to market demands for new high-strength copper alloys due to technological advancements such as the Internet of Things and electric vehicles, we have developed new alloys (P1000HS and others) and are applying them to high-tech products requested by customers.

It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

The SCFAN-CTRL-5U is an internal fan control module installed inside the chassis to manage cooling performance. It integrates with FAN trays and operates through Kontron’s Power Supply Control Module (PSCM) to control up to one 12V @ 3.5A fan and seven 12V @ 2.5A fans. This module ensures efficient thermal management and stable system operation in high-performance VPX-based embedded systems. It is deployed in the M-SAM-II multi-function radar system, providing reliable and optimized cooling control for mission-critical environments.

Rolatube IAM (Integrated Antenna Mast) is a lightweight, man-portable communications mast that integrates a high-efficiency dipole antenna directly into its structure—redefining rapid tactical deployment. Built from Rolatube’s proprietary bistable composite, the IAM unrolls to full height without tools, enabling users to connect and transmit in seconds. Available in 3.5 m and 7 m models, the mast weighs just 1.9 kg and packs down to a 150 mm roll, offering unmatched portability for dismounted operations. Designed for reliable RF performance, the IAM ensures no signal loss when in contact with grounded surfaces. Its embedded omni-directional dipole antenna delivers superior range and VOR communication performance compared to traditional systems. The 3.5 m IAM comes in VHF (30–300 MHz) and UHF (136–470 MHz) variants, each available in four colours, with a top-cap socket for L-Band antenna integration, extending the system’s use to applications such as telemetry, GPS, and aircraft surveillance. The mast can be handheld, guyed, or elevated via an integrated rigging point, and is engineered to meet MIL-STD-810G, fully maintenance-free, and resistant to water, dust, and UV. With a wind rating of 100 km/h (62 mph) when guyed, the IAM stands up to demanding field environments while delivering high-performance, elevated communications infrastructure at the tactical edge.

Additive manufacturing: - delivers compact, high-efficiency transmission coolers with optimized fluid paths, reducing pressure loss and enhancing thermal performance in compact spaces. - provides custom designed oil coolers with improved heat dissipation, ensuring reliable performance, reduced weight, and enhanced durability in demanding environments. - enables integrated multi-domain liquid cooling solutions, providing precise thermal management and compact designs across complex systems with diverse cooling needs.