Type : Axial (3P) Size(Ø, mm) : 230 × 87 Weight(kg) : 14 N. Speed(rpm) : 4500 N. Torque(Nm) : 75(Air)/85(Liquid) N. Power(kW) : 35(Air)/40(Liquid

Dim. : 2"W High strength type 13 webbing 2 rows of 1/2" MOLLE webbing Removable antimicrobial/FR treated spacer mesh pad 2" Cobra® buckle Vertical pull test 6,800 lbs +/-5% Loop/hook selectable at the inner Velcro Composition Material : 500D Cordura® + ARAMID / PV® Size : SMALL 32" - 35.5" MEDIUM 34.5" - 38" LARGE 38" - 41.5" Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)

Toxic gases, such as Silane (SiH4), Nitrogen Trifluoride (NF3), Sulphur Hexafluoride (SF6), Ammonia (NH3), Nitrous Oxide (N2O), etc. must be contained in IMDG certified MEGC tubes for ocean transportation. For high purity gases such as SiH₄, and NF₃, DS Aether CT provides internal-polished tubes to a grade of 3S, 25S, etc. depending on customer's requirements. DS Aether CT’s tubes keep moisture levels below 1 ppm or 3 ppm by a heated vacuuming process so that gas quality can be maintained at high purity level.

It is capable of carrying heavy payloads, making it suitable for transporting critical supplies and equipment. The system supports swarm operations, enabling coordinated missions with multiple drones. Its robust design allows flexible deployment across diverse military scenarios, enhancing operational efficiency and resilience.

The QVM-200 is an ultra-compact video transmission module mounted on a small device that compresses camera video in real time and transmits it to a remote control device. This product features a built-in H.264/H.265 codec, compressing high-definition video at FHD (1920x180p) @ 60fps and UHD (3840x2160p) @ 30fps. It also supports various video transmission protocols, enabling real-time video control and operation. In particular, the QVM-200's built-in real-time high-compression video transmission technology enables ultra-low bandwidth video transmission, ensuring stable video transmission even in wireless environments with extremely limited bandwidth. It provides a MIPI camera interface and a USB port for connecting EO and IR cameras. Its minimal size and weight allow it to be installed even in ultra-compact drones with limited space, weight, and power consumption.

STIM300 is a small, tactical grade, low weight, high performance non-GPS aided Inertial Measurement Unit. It contains 3 highly accurate MEMS gyros, 3 high stability accelerometers and 3 inclinometers. The IMU is factory calibrated and compensated over its entire operating temperature range. STIM300 is a cost-effective ITAR free solution for systems that only had FOGs as an alternative when reaching for the performance level of that STIM300 can offer. Each axis is factory calibrated for bias, sensitivity and compensated for temperature effects to provide high-accuracy measurements. The unit runs off a single +5V supply and communicates via a RS422 interface. The use of a 32-bit RISC ARM microcontroller provides flexibility in the configuration, like choice of output unit, sampling frequency, LP filter -3dB frequency and RS422 bit-rate and protocol parameters. For more advanced users, STIM277H may be put in Service Mode. In this mode all the configuration parameters can be temporarily or permanently changed by overwriting the current settings in the flash memory. Service Mode also provides the ability to perform single measurements, perform diagnostics and obtain a higher detail in the status byte.

These units are very compact in size and weight is less than 400 kg. Units in this compartment can have rated output power up to 90 kVA. Units are fully compliant with the required parameters and are used as solid state units. EAC-series frequency converters are strictly compatible with all types of aircraft requiring output AC and confirm the international standards.

ORSKOREA’s thread grinding machines are designed for high-precision machining of both internal and external threads, covering a wide range of thread profiles and dimensions. These machines are critical for producing aerospace fasteners, defense system parts, precision ball screws, and other components where accuracy and durability are vital. Key Advantages • CNC Control: 4-axis (SGTE) and 5-axis (SGTI) for complex thread profiles • High-rigidity structure minimizing vibration and thermal distortion • Built-in dressing and balancing units for consistent quality By shortening processes and improving efficiency, ORSKOREA’s thread grinders reduce costs while enabling high-value, high-accuracy production. They also serve as advanced domestic alternatives to imported machines, strengthening localization and export competitiveness.