InspecX is a next-generation autonomous swarm inspection system for aircraft. It is addressing challenges in the $100B global aviation maintenance market. Airlines face a shortage of certified technicians, with Boeing projecting demand for over 700,000 by 2044. Aircraft-on-ground (AOG) incidents cost $10,000–$150,000 per hour, making downtime reduction critical. InspecX uses swarm coordination and LiDAR-based SLAM to perform safe inspections in GNSS-denied or indoor environments. It reduces required technicians from 9 to 3 and inspection time from 10 hours to 3, achieving over 50% cost savings for large aircraft. Beyond efficiency, InspecX helps airlines avoid AOG losses, accelerates maintenance cycles, and improves airworthiness. By maximizing fleet readiness and ensuring reliable operations, it provides a scalable, future-proof solution. InspecX is positioned to become the new global standard for aviation safety and maintenance in the era of intelligent mobility.

Type : Radial (3P) Size(Ø, mm) : 152 × 106 Weight(kg) : 5.1 N. Speed(rpm) : 2000 N. Torque(Nm) : 55 N. Power(kW) : 11.5

Mil-COTS Isolated DC-DC converters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. These “off-the-shelf” converters are compatible with the industry standard format, operate at a fixed frequency, and follow conservative component derating guidelines. MilQor products are designed and manufactured to comply with a wide range of military standards.

A distributed sensor system based on BOTDA (Brillouin Optical Time Domain Analyzer), capable of detecting structural deformation and external intrusion.

CarboNIX NEO is an off-the-shelf separation system available in 8", 15", and 24“, 31.6” and 38.81” sizes. It is scalable to any custom diameter for satellites upwards of 1000 kg. While NEO uses the same lock mechanism and pusher arm subsystems as CarboNIX, NEO employs a new clamp ring system which is stronger, stiffer, can withstand higher loads and launch heavier spacecraft than any other separation system on the market.

Device for checking turret operation, turret fan control, air conditioning control, and status.

This Military Field-Grade Uninterruptible Power Supply units are designed for the extreme environmental and demanding electrical conditions of Military/Aerospace applications. This UPS incorporates field proven high efficiency designs and rugged packaging technologies. This UPS units will accept a wide range of input voltage and frequency values while delivering a well-conditioned AC or DC output to the load. The use of lithium ion batteries permits the lowest profile and lowest weight solution in its power class. It is designed and manufactured in SynQor’s USA facilities to comply with a wide range of military standards. Options include two DC outputs, a DC input rated for military 28 VDC sources, and an electronic breaker on the AC output to permit fault-tolerant parallel operation for higher power and/or N+M systems.

The lightest plate carrier of 1.95 lbs Taktic buckle system for quick connect & release Antibacterial/FR treated padded spacer mesh system Poly mesh cummerbund for increased ventilation Flush admin chest pocket with internal elastic straps Rear internal pocket for storage Elastic webbing straps for cable management PALS webbing for MOLLE attachment Removable front flap Zipper for DS Assaulter's Zip-On Back Panels QASM buckle System Plate pocket incorporated 4-way stretch to accommodate multiple plate thickness Composition Material : 500D Cordura® + ARAMID / PV® Size : Small : 8.5" x 11.5" Plate Pocket Medium : 9.3" x 12.3" Plate Pocket Large : 10" x 13" Plate Pocket XLarge : 10.9" x 13.8" Plate Pocket Colors: MC (MultiCam) BMC (Black MultiCam) BK (Black) RG (Ranger Green) CYT (Coyote Brown)