The Pseudo-GNSS system is designed with tightly integrated firmware and hardware. The firmware generates PRN signals based on GNSS orbital data, modulates them to resemble real GNSS signals, and ensures time synchronization in a Master-Slave structure. A user-friendly GUI software enables easy device control. The hardware consists of a power unit, signal transmission unit, and communication unit. The power unit ensures stable supply through low-noise design, while the transmission unit radiates GNSS-like signals indoors. The communication unit supports Wi-Fi and wired connections for synchronization and control across multiple devices, with compatibility for smartphones and tablets to display positioning results.

6 Series Mixed Signal Oscilloscope; (4) FlexChannels with 62.5M record length, 1-year warranty, Certificate of Traceable Calibration Standard

The MIL-DTL-5015 series of connectors were developed as military standard connectors and applied to various military equipment, it is also used in general industries, medical care, electric vehicles, robots and automation facilities based on its high durability and reliability. This series is threaded coupling and the connection between the contact and the wire is based on soldering. It can be used compatibly with third-party products of the same standard since it is produced according to military standards.

ㅇKey Features RF Front-End - Frequency : C-Band - Tx Power : +27 dBm(0.5 W) , Rx Range : -10 ∼ -100 dBm - Rx Sensitivity : -95 dBm@2 MHz Baseband & Modem - Downlink : 2.4 Mbps / Uplink: 8 kbps - QPSK waveform and CTC Forward Error Correction Anti-Jamming / Anti-Spoofing / Video CODEC - Anti-Jamming Capability using DSSS - Anti-Spoofing Capability by AES-256/ ARIA-256 Encryption - Support H.264 / up to 1920x1080x30f Interface - 10/100 Base-T Ethernet x1, RS-422 x1, RS-232 x2 - 3G-SDI Digital Video IN/OUT Interface - Limited Discrete I/O (1PPS/sync_in, reset_in, status_out) ㅇQuality and Certification - MIL-STD-810G - MIL-STD-461F

A rotating component designed to accelerate and direct airflow gas within the engine.

Optimized and qualified for next generation Electronic Control Units the Intercompact Series is an innovative solution for PCB to PCB and floating mouting rack and panel applications currently offered in both signal and Ethernet versions. Designed to meet the requirements of the rail and industrial environments, it is also suitable for other demanding markets such as defence, space and test & measurement.

A lightweight high tensile aluminium frame, suspended by elastomeric anti-vibration mounts, provides superior ‘sway-space’ between the frame and the outer container and is the best possible way to safeguard delicate equipmentMore robust and stainless steel variants are custom-made for heavy payloads and corrosive environments. Enhanced ‘sway space’ between inner frame and outer case to prevent contact with outer container All our 19 inch Amazon Racks have a ‘user adjustable’ inner frame allowing back to front movement of 50mm within the outer container to accommodate front panel and rear wiring/ connector needs. Optional ‘EasyGlide’ removable, self anchoring, internal frame system Standard, stainless steel M6 threaded fasteners secure electronic equipment into floating stainless steel cage nuts at both front and rear of frame. All our 19 inch Amazon Racks have positive stacking, aligning at the front face regardless of rack depth

R&S®M3SR은 민간, 방위, 해상 지-공-지 통신 솔루션을 위한 최신 고정식 무전기를 대표하는 기기입니다. 로데슈바르즈는 점차 엄격해지는 통신 요구사항에 대해 수년 간의 실무 경험을 기반으로 한 기술 개념으로 대응하고 있습니다. 무전기는 가장 엄격한 품질 측면을 충족하여 최대 RF 성능을 제공합니다. 이 고성능 소프트웨어 정의 무전기는 전 세계 보안 당국과 정부 조직에서 높은 평가를 받고 있습니다.