The high-reliability DC-DC onverters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. SynQor’s innovative QorSeal® packaging approach ensures survivability in the most hostile environments. Compatible with the industry standard format, these converters operate at a fixed frequency, have no opto-isolators, and follow conservative component derating guidelines.

The RES3000 is a compact, rugged fully managed Layer-2/3 Ethernet switch, optimized for SWaP and VICTORY-compliant military/industrial deployment, offering 12–24× 1 GbE (plus optional 4× 10 GbE), rich protocol support via OpenWare™, and wide-range rugged certifications. • Form factors: 12× 1 GbE (~2 kg), 24× 1 GbE (~3 kg), or 24× 1 GbE + 4× 10 GbE • Features: IPv4/IPv6 routing, OSPF/RIP/VRRP, VLAN (up to 4096), QoS, multicast, PTP, BIT, DoS prevention, sanitization, OOB mgmt. • Ruggedized: Conduction/convection cooling, MIL-STD certifications, −40 to +71 °C • Compliant with VICTORY networking architecture

EMCORE’s exclusive photonic integrated chip (PIC) technology delivers improved reliability and repeatability. The precision non-ITAR GEO-FOG 3D Dual features two GNSS antennas on a fixed PTK baseline to offer increased heading, pitch, and roll accuracy for static and dynamic applications where a single antenna system can be problematic. This dual antenna INS is the best choice for systems requiring heading at start-up or in low dynamic conditions. Highlights Data rate 10x faster than other available systems Cutting-edge sensor fusion for dependable, precise navigation in a full array of applications and conditions Six degrees of freedom (DoF) IMU with integrated gyros and accelerometers Technology Details Photonic Integrated Chip Technology EMCORE’s new photonic integrated chip (PIC) technology reimagines FOG technology by replacing individual fiber components with an innovative integrated planar optic chip. This results in a FOG with PIC Inside™ that’s even more reliable and delivers superior repeatability unit-to-unit. With three of these integrated photonic gyros at its core, the P-1750 IMU enables the GEO-FOG to provide the safe, accurate performance autonomous platforms demand. Learn More DSP Technology EMCORE’s DSP electronics improve FOG performance in critical areas such as scale factor and bias vs. temperature, scale factor linearity, and maximum input rate. EMCORE’s exclusive DSP design overcomes the limitations of analog signal processing, eliminating temperature-sensitive drift and rotation errors. GEO•FOG Manager The GEO•FOG Manager is ideal when integrating EMCORE’s GEO•FOG 3D and GEO•FOG 3D Dual INS. Learn More Developer’s Kit for Rapid Integration The KVH FOG/IMU Developer’s Kit includes easy-to-use software to accelerate your IMU and FOG integration, development, and interface efforts.

Key Features Revolutionary speed enabled by advanced LFD technology High-resolution and highly accurate prints Compatible with a wide range of resins including functional and engineering materials Dimensions: 390 × 367 × 554 mm Build Volume: 200 × 125 × 210 mm Weight: 18.3 kg Specifications XY Resolution: 25μm Minimum Layer Thickness: 25μm Maximum Print Speed: 100 mm/hr

V-BAT Teams is powered by Hivemind, the world’s best AI pilot and the most strategic defense tech of our generation. AI pilots enable aircraft to maneuver without GPS or communications and enable the concept of intelligent teaming – the ability to autonomously read and react to each other, adversaries, and the environment to accomplish the mission.

Generates 2D electronic map images using a terrain database and transmits them to the mission computer via the ARINC-818 standard. Using Collins Aerospace's TERPROM software, enabling automatic terrain-following flight and terrain collision avoidance functions. - x2 Gigabit Ethernet - x1 MIL-STD-15583B - x4 Discrete Input - x2 Discrete Output - x4 ARINC-818 Transmit - 512GB Solid-State Disk (Digital Moving Map) - 64GB Solid-State Disk (TERPROM) - Size : 135.1x339.0x225.4 mm - Weight : 4.25Kg - Power : MIL-STD-704F (28VDC, 60W) - Environment: MIL-STD-810G - EMI/EMC: MIL-STD-461G

r-TWR are digital towers which enable the remote use of air traffic services (ATS) from any location. Being at an airport, air base or at a centralised location, distance is no longer a factor. The r-TWR functions can be integrated to a traditional tower as a hybrid solution, and can support the ramp and apron management using the same information. It can also be deployed and put in place when needed. Through the use of digital camera technology and sensors, operators can effectively conduct and manage various services remotely, based on visual surveillance. This removes the need to be on-site and occupying critical space at an airport, in favour of a chosen location.

Haigh-Farr specializes in the design, manufacture, and testing (electrical and environmental) of conformal and non-conformal antennas. As a leader in the aerospace industry, our antennas are found on the latest high-performance airborne and space vehicles. Haigh-Farr is well known for its reliable, high-quality range of customizable and off-the-shelf solutions.