It is commonly used in industrial and other devices to generate triggers ranging from one to several thousand FPS, ensuring precise timing synchronization with various devices. Periodic Mode: Continuously generates trigger signals after configuration. Burst Mode: Generates a single trigger signal upon receiving the best command via serial communication. *** Product Expansion and Usage ***  Four Operating Modes  Periodic mode: Generates a single-cycle signal based on the configured frequency and duty ratio.  Burst mode: Generates a single-cycle signal synchronized with a software trigger.  External trigger mode: Generates a single-cycle signal synchronized with an external trigger.  External trigger bypass mode: Distributes signals triggered externally.  Connect the trigger output signals from a Master Trigger Generator to a Slave Trigger Generator (as shown below).  By connecting one of the Master TG’s Trigger Outputs (1 to 16) to the Slave TG’s External Trigger Input: Outputs 1 to 15 of the Master TG remain unchanged. Outputs 16 to 31 of the Slave TG will mirror the Master TG’s Trigger Output. (Note: Each trigger signal passing through a TG experiences a delay of ten ns. However, since trigger outputs operate in the range of tens to thousands of Hz, users will not notice the delay).  Example with 17 TGen-16C units: Produces up to 256 Trigger Output Channels (16 × 16).

- Capable of manufacturing various types of cable assemblies, including MIL-DTL-38999, D-Sub, and other military-grade connectors - Expertise in both internal and external cable assembly configurations - In-house testing capabilities for electrical characteristics, including insulation resistance, dielectric withstand voltage, and continuity - Equipped with dedicated facilities and specialized equipment for cable assembly production and testing

Plane Windows are used as substrates for a variety of applications, such as laser window, output couplers, beamsplitters, beam combiners, mirrors, dichroic filters and plate polarizers. Considerations in selecting window substrates include transmission range, absorption coefficient, incident laser power density and environmental factors such as pressure, temperature, moisture, abrasion and corrosion. Plane Windows listed under UV / VIS / NIR substrates are specified for applications involving coating wavelengths 193nm ≤ λ〈2.0 μm. Units for these substrates are given in mm. Plane Windows listed under IR substrates are specified for applications involving coating wavelengths λ≥ 2.0 μm. Units for these substrates are given in inches. Refer to the THIN FILM COATINGS section for information on coatings that can be applied to these substrates.

C-UAS and Advanced Threats 70kW CBC HEL Source

The FORCE2C is a rugged 3U VPX flight-certifiable mission computer featuring a QorIQ T2081, full avionics I/O, safety certification artifacts (DO-254/178C up to DAL A), and FACE compatibility. • QorIQ T2081 (1.8 GHz, 4 cores), SBC314C SBC: 4 GB DDR3L, 16 GB SSD, PCIe Gen 2 ×4 • Avionics I/O: ARINC 429 (8 TX, 10 RX), MIL-STD-1553 (4), discrete I/O, serial (RS-422), GbE, USB, RS-232/422 • Rugged conduction-cooled build; MIL-STD / DO-160 rated; −40 °C to +71 °C • DO-254/DO-178C certification artifacts available (DAL D to A) • FAA certified (SOI complete), FACE compliant

Lock Ring & Braid & Backshell

The JW22992 connector was developed for the purpose of high-power transmission with demanding military standards and exhibits IP67-grade water and dust resistance. It is also designed in the range of 40 to 200 amps and is used for high-power military and industrial equipment that requires the highest reliability. Key Features: High Power Transmission, Designed to handle high currents, Robust construction It provides a stable connection with five key grooves and two-line screws.

OZVPX3-410 is Olzetek's flagship 3U product. Olzetek's 3U Platform Family has maximum scalability using Xilinx Zynq® UltraScale +MPSoC, which is capable of a high-performance Arm®-based multi-core and multi-processing system, as well as video signal/packet processing functions, graphics and video pipelines. This is a SoC product designed to meet challenging demands by offloading essential applications to dedicated processing blocks and supporting major peripherals and interfaces. The OZVPX3-410 product is an ideal solution that can be applied to applications requiring Analog Video (PAL/NTSC) encoding and decoding and includes customization options (consignment development) according to specific video inputs, requirements analysis, and design. We also provide consignment development of a complete Video 3U Platform.